Header banner
Revain logoHome Page
cpu cooler be quiet! tf2 bk003 logo

CPU Cooler Be quiet! TF2 BK003 Review

8

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.5
Computers, 💻 Computer Components, 🧰 Computer Internal Components, 💻 Computer Components

View on AmazonView on ЯM

Media

(8)
img 1 attached to CPU Cooler Be quiet! TF2 BK003
img 2 attached to CPU Cooler Be quiet! TF2 BK003
img 3 attached to CPU Cooler Be quiet! TF2 BK003
img 4 attached to CPU Cooler Be quiet! TF2 BK003

Description of CPU Cooler Be quiet! TF2 BK003

Main Purpose Processor Type Active cooler Design Fans 1 pc Heat pipes 5 pcs Heat pipe contact indirect Heat sink material aluminum / copper Substrate material Nickel-plated copper Mounting type double-sided (backplate)SocketAMD AM2/AM3/FM1/FM2AMD AM4Intel 775Intel 1150Intel 1155/1156Intel 136 6Intel 2011 / 2011 v3Intel 2066Intel 1151 / 1151 v2Intel 1200FanFan diameter135mmSliding bearing typeMaximum speed1400rpmAuto speed controller (PWM )Max. Airflow 67.8 CFM MTBF 80KhMaximum TDP160W Airflow blowing down (to motherboard) Replaceable General Power 4-pin Noise 24 dB Dimensions 137x165x112 mm Height 112 mm Weight 680 g

Reviews

Global ratings 8
  • 5
    4
  • 4
    4
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

The best thing Ive ever used, a great item for everyone!

The first time I installed a cooler from this manufacturer, I was a little confused about how to do it, but in the end I was successful. The cooler operates with as little noise as is humanly possible and is put in an itx system. The temperature within the room never exceeds 80 degrees.

Pros
  • extremely cooling, extremely quiet
Cons
  • a somewhat peculiar installation, but overall it's not that big of a deal.

A solid choice that is also quiet and has the ability to constructively close the memory modules; these modules cannot be removed without first removing the cooler, which is especially true if they have radiators. However, one of the benefits is that they become cooler. MX-4 thermal paste has been used in place of the stock thermal paste.

Revainrating 4 out of 5

A good product, I advise you to try it.

They wrote that it is under severe pressure from AMD in this section. I'm putting the blame on Intel; the amount of stress placed on the processor is quite high and, in my opinion, even excessive. Got pros: Made and packed in a satisfactory manner. Even at maximum speed, a power supply rated at 160 W is able to dissipate somewhat more than the claimed power, which for Intel is somewhere about 180 W. Extremely quiet, even when traveling at full speed, provided that it is by itself and not in…

Revainrating 4 out of 5

A good product at a good price, I advise you to try it.

A extremely controversial model. On the one hand, the overall quality of the craftsmanship, the great fan, and the clean set all captivating; on the other hand, several miscalculations in the design are disheartening. Very weird setup. It is vital to keep the heatsink in place while simultaneously tightening the clamping screws from the back of the socket. At the same time, you should make every effort not to spread the thermal paste all over the socket. In addition, while you are mounting the…

Pros
  • Short in stature. whatsoever kind, but blowing in the vicinity of the socket space. Effective heatsink with a suitable amount of fin area for a top-flow cooler. Very quiet fan. Mounts for the AM4 system.
Cons
  • In my opinion, there is room for improvement in the clamping force of the mount. Installation is a very difficult process (with the exception of the LGA2022 platform). The cost is really steep.

I got it from a website in a different country along with several other pieces of gear, and the overall pricing was reasonable. It was discovered, as the product was being put together, that one of the sleeve nuts lacked an exterior thread. Due to the fact that it was purchased in another country, it didn't make much sense to write to the store, so I wrote in the form of a guarantee through the website of the manufacturer instead. They did not answer right away, but the specifics were altered…

Pros
  • Additionally, it blows RAM or power circuits (depending on how you say it), is quiet and efficient, is enormous while at the same time compact, and is large.
Cons
  • excluding the cost, of course.

Revainrating 4 out of 5

I'm satisfied with it, there are only some small flaws.

Stay silent Although it's not the cheapest or the best Top-Flow cooler available, the Shadow Rock TF2 gets the job done. The stated TDP of 160W appears to be accurate. However, keep in mind that the primary goal of this method is silent operation, and not breaking overclocking records. Listed below are some advantages: The Beakwhite fan is fantastic. In this respect, they are truly unique. This Silent Wing3 turntable does employ a non-standard 135mm model, and it is also slightly simplified…

Revainrating 4 out of 5

I am completely satisfied, item complies with description.

In overall, I'm pleased; the cooler performs its job, even in the extremely congested SilverStone LC16B-MR Black case. Previously, the AMD cooler for the Ryzen 3900 X would heat up to 95 percent under stress; currently, it averages 55 degrees Fahrenheit at idle, 75 degrees under load, and 40 degrees without the case lid. Furthermore, thermal paste should be utilized to achieve a low noise level. DC1 BZ001

Pros
  • Large, low-key, and not very tall (which can be useful in certain circumstances)
Cons
  • zamorochnaya installation was so complicated that I had to take apart my computer just to swap out the RAM.

Revainrating 5 out of 5

I was surprised by the quality for this price.

There must be a temperature difference between the heated component and the heatsink for the heatpipe cooler to work. The heat pipe effect is nullified by a marginal temperature difference. Since the copper tube begins to disperse heat entirely through the thermal conductivity of the metal itself, rather than the ability to transfer heat by the reagent inside the tube, most coolers are unable to cool the CPU below their threshold values. Thankfully, the fins on this cooler extend all the way to

Pros
  • For quite some time now, I have been trying to track down a socket 1200 cooler. However, many designs suffer from having a disconnected cooler platform base from the heat pipe fins. that, here, the engineers actually considered.
Cons
  • No