🔧 Enhance Your CREALITY Printer with Original Replacement Accessories Review

I've been using these replacement hot ends on my Creality CR-10 for a while with mixed success. The last four I got are completely useless because the nozzles in ALL FOUR are 100% stuck and can't be changed. This is quite a problem as the pre-installed nozzles are oversized and prone to clogging, requiring replacement as soon as you open the box. A stuck nozzle I could understand. But completely stuck in all four hot ends? I spent hours disabling EVERY one of these attachments. I've tried both…

I have a CR-10 S5 printer. The print head expired 3 weeks ago and I came across this list while looking for ideas for replacement parts as Creality is not responding to my emails as it is under warranty. After reading the reviews and watching the installation videos I knew exactly what I needed to do and after waiting a week and a half due to the big sausage robbery of 2020 I finally got it and installed it. It should be noted that the nozzle attached, like the others, does not have a size…

Same as OEM but ours couldn't extrude at first. He made tiny flakes of extruded plastic that rolled sideways (indicating a clogged nozzle). not labeled like the others. The seller confirmed that it is 0.4. It doesn't appear to be blocked at all. Brand new etc. All our setup at the moment is for the 0.4 nozzle and we have seen that not enough filament is going through it causing the feeder to slip and pushing the filament back into the bowden hole. We decided that either the new hotend wasn't…