🔌 DHT Electronics Industrial Electrical Coaxial Adapter - Female Review

These adapters will be very useful for a radio amateur. Unfortunately, it's not worth buying. I connected one to a piece of coax cable and the receiver. It worked fine. When I removed the PL259 coax connector, the entire pin and teflon insulator that was glued to the center connector of PL259 came out. I tried it on an unused Amphenol connector and the same thing happens, yes with both new adapters. To return.

These adapters allow me to connect a disco horn antenna I made for the 2m ham band to my new digital scanner. Good strong connection. I have other DHT connectors and they all fit me perfectly.

These adapters are totally useless! The thread onto which the protective ring is screwed is NOT suitable. In the case of close butt joints, the shielding ring must not be screwed in more than one third.

The SO-239 end of this adapter will not mate with the PL-259 connector. I will return them and order genuine adapters elsewhere.

I love these connectors. I connected all my radios via BNC connectors including my HF setup. They fit well, feel solid, and their finish looks polished and sophisticated. No questions.

Neither of the two in the pack fit more than a few threads into a PL-259 fitting. It's not the cable as they don't work on any of mine, but it works fine on another old adapter. The thread is improperly machined and plated. Hey, this is for the guys from Russia. We need good connections! Got it for overnight delivery. Let's get back to the real electronics store.

These adapters are very useful for a radio amateur. Unfortunately, it's not worth buying. I connected one to a piece of coax cable and the receiver. It worked well. When I removed the PL259 coax connector, the entire pin and teflon insulator that was glued to the center connector of PL259 came out. I tried it on an unused Amphenol connector and the same thing happens, yes with both new adapters. To return.

Couldn't connect or disconnect them, another check noticed and found the same problem, when fully tightened a short occurs. did some additional testing and found it failed the stability test. During testing I accidentally broke a pin and found it was a PLASTIC pin covered in metal! no solid copper pin. not worth the hassle of a refund but this is by far one of the worst products I've gotten from Amazon.

This review was written by Amanda's husband, the account holder. Honestly, why do we need this? It effectively only extends the BNC connector by about an inch or so. So it's a niche item, but I have a thing for niche items and I can actually use that on the one or two devices I have. Unfortunately, niche or not, it's not well done. I tried to remove the SuperBat BNC jack adapter from it and barely pulled it out - after the latch on that part detached from the jack. , but I should NOT do this…