🚗 Enhance Steering Performance with Energy Suspension 810104G for Tundra Trucks Review

2000 Tundra TRD. I went to Youtube and found the operation. Everything went according to plan. All you have to do is remove the anti-roll bar and tie rod on the driver's side and disconnect the steering fluid line from the clamp at the top of the strut. The jumper is useful for the middle screw. An impact wrench helps a lot to loosen other nuts and not twist the rail. Use the new blade on your utility knife to snip off the ends of the socket before cutting into it with a socket. Tighten as…

Quality product, fairly easy installation (but I've done it before). Let's see if they last and for how long. I replaced the same bushings with the same product (but red) a few years ago and they were OFF. Factory bushings lasted about 11 years. As mentioned, the red replacement is only a few years old. While maybe it was me (user/installer error) I don't know, so I tried again, this time being extra careful to install them.

Absolutely outstanding upgrade. The steering wheel of my Tundra 05 with 94k has warped a lot. The main thing I noticed is that less steering correction is required to compensate for road camber. Even if I shake the front wheel as the truck lifts off the ground, it's as solid as it used to be. I've noticed more feel in the steering wheel off the road. Still, it's nice to get feedback. Note the U-bracket on the passenger side. It still happens, but only one path is correct, and the factory manual

Fits my 2001 Tundra perfectly. Installation is easy and the package comes with instructions should you need them. The old bushings on my Tundra were completely worn out, resulting in a lot of play in the steering. Bad bushings moved the rack when you turned the handlebars instead of guiding the front wheels. At high speeds, the front wheels wobble, so I have to constantly adjust the steering to go straight. After installing those rack bushings, the steering wheel tightened and I have a very…

This steering gear bushing kit was installed on a 2002 Toyota Tundra. Everything came together as expected. There is a great video on youtube for this. Search for "STEERING GEAR BUSHING REPLACEMENT TUNDRA 2000-2006 - CAM". This is not my video. The video shows the installation of the Total Chaos kit. As far as I can tell, this Energy Suspension kit is exactly the same. An additional tip. To remove the original horizontal bushing after trimming the edge as shown in the video, I inserted a small…

Toyota Tundra SR5 2000 г. Просмотрел видео на youtube: 2000-2006 tundra замена втулки рулевой рейки - сделай я я я торопился, поэтому зто у у д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д д ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч ч contib I liked black bushings instead of red ones. I also went to the hardware store for things I needed. Lessons Learned: Needed a 4" C-clip, a larger screwdriver, so I…

I installed this kit on my 2006 Toyota Tundra SR5 Crew Cab with V8 and 2WD. As the 1st generation Tundra and Sequoia ages, the rubber bushings in the steering rack mounts begin to wear and soften. This happens gradually and over time the steering will feel loose and fuzzy. These polyurethane bushings are not hard plastic. They are designed to mimic the harshness of rubber bushings when new. I didn't notice any extra road noise in the truck or extra vibrations transmitted through the steering…