Header banner
Revain logoHome Page
πŸ’ͺ ezarc r678hm endurance 6-inch carbide reciprocating saw blade for thick metal, cast iron, and alloy steel – 8tpi, pack of 3 logo

πŸ’ͺ EZARC R678HM Endurance 6-Inch Carbide Reciprocating Saw Blade for Thick Metal, Cast Iron, and Alloy Steel – 8TPI, Pack of 3 Review

5

Β·

Average

Revainrating 3 out of 5Β Β 
RatingΒ 
3.2
πŸ”© Power Tool Parts & Accessories, πŸ”§ Power & Hand Tools

View on AmazonView on Π―M

Media

(4)
img 1 attached to πŸ’ͺ EZARC R678HM Endurance 6-Inch Carbide Reciprocating Saw Blade for Thick Metal, Cast Iron, and Alloy Steel – 8TPI, Pack of 3
img 2 attached to πŸ’ͺ EZARC R678HM Endurance 6-Inch Carbide Reciprocating Saw Blade for Thick Metal, Cast Iron, and Alloy Steel – 8TPI, Pack of 3
img 3 attached to πŸ’ͺ EZARC R678HM Endurance 6-Inch Carbide Reciprocating Saw Blade for Thick Metal, Cast Iron, and Alloy Steel – 8TPI, Pack of 3
img 4 attached to πŸ’ͺ EZARC R678HM Endurance 6-Inch Carbide Reciprocating Saw Blade for Thick Metal, Cast Iron, and Alloy Steel – 8TPI, Pack of 3

Description of πŸ’ͺ EZARC R678HM Endurance 6-Inch Carbide Reciprocating Saw Blade for Thick Metal, Cast Iron, and Alloy Steel – 8TPI, Pack of 3

[Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades. [Heavy Metal Application] 8 teeth per inch teeth design is ideal for cutting all kinds of metal in demolition applications, e.g. high-alloy construction steels, stainless steels, rebar and car beams. [Ultimate cutting performance] Easy to cut advanced materials where bi-metal blades fail quickly, such as stainless steels, high-alloy steels or hardened steels. [Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength needed for heavy duty demolition work. [Blade Dimension] 6-inch 8 TPI metal cutting (3/16 in. -1/2 in. ), 1/2inch universal shank fits all major sawzall saws such as Bosch, Milwaukee, Black&Decker, Hitachi, Makita, Metabo, Dewalt, Porter Cable, Skil, Rockwell etc.

Reviews

Global ratings 5
  • 5
    2
  • 4
    0
  • 3
    1
  • 2
    1
  • 1
    1

Type of review

Revainrating 5 out of 5

Impressive Blade Performance, Parts & Accessories

I tried 4 brand new Milwaukee saw blades (made for heavy steel) in about 20 minutes trying to shear off one of the lower control arm bolts on my truck and all they did, was it got boring. I've used one of these blades and quickly cut through 4 screws in about 3 minutes and it's still like new. I don't usually leave reviews but these are amazing.

Cons
  • Some Cons

Revainrating 5 out of 5

Outstanding durability.

I used this blade to cut a 1/4" stainless steel rod. The previous blade I used dulled after one cut and took me a few minutes to get through. I made three cuts with this one Blade made in 3 minutes It can still be used for other work Good product Stainless steel is the most difficult material to cut and this blade cuts through it with no difficulty.

Cons
  • -

Revainrating 1 out of 5

Two exhaust bolts and it went deaf.

I have used carbide blades in the past and they last much longer than this EZARC carbide reciprocating saw blade. I bought it to cut some rusty exhaust pipe bolts and it did the first job well, but not as well as I expected. He struggled to cut the 2nd exhaust pipe stud and I could barely finish the cut. Return to Revain as this EZARC Carbide Reciprocating Saw Blade will not cut as advertised.

Cons
  • Extendable

Revainrating 3 out of 5

Tooth pitch too high for thin-walled metal pipes

I found the saw blade difficult to cut. The blade's teeth bounced off the pipe, making cutting difficult. I should have used thinner teeth. Also, as the blade began to cut, I noticed that the edge of the pipe slipped between the teeth of the blade and snapped. I should have used thinner teeth. And finally, I used a blade once and three carbide tips broke during use. I believe the tips break off when the blade is attached with the edge of the pipe between the teeth.

Cons
  • I don't like it that much, it's ok

Revainrating 2 out of 5

Cuts cast iron pipe VERY slowly

I tried using this product to cut 4 inch cast iron pipe. She held the saw's shoe firmly against the pipe and worked for about three minutes just to cut through the wall of the pipe. Once through, she cut off about an inch every minute until she was about three-quarters of the way through. At this point the cut started smoking so I took out the blade and let it cool. didn't bend at all. As the blade cooled, I felt the blade and found the teeth were almost completely worn away! So it couldn't…

Cons
  • Functionality