🔍 Toyota T100 Driver Side Mirror Glass - Fit System 99153 Review

Attention customers. According to the description, the Toyota T100 mirror fits, but it is too small. Now I'm stuck with no side mirror. The seller has to correct 2 different descriptions.

Ordered this for our 1995 Toyota T100 and whilst it was supposed to fit it did not. We put it in and with contact cement it's doable. This is about 1/2 inch shorter than the length, although the width was correct. I hope he stays with us on our travels.

This mirror is designed to attach to a cracked mirror using the double sided tape provided. On the 1993 T100, it is slightly shorter on the horizontal axis and slightly longer on the vertical axis, making it difficult to attach. This will work, but I recommend a dry fit with no tape to get a feel for where it should sit in the mirror frame to make good contact.

This mirror will not fit the hand mirror on the driver (or passenger) side of my 1995 T-100. It is 1/4" to 3/8" too tall and about 3/8" too narrow. It may not lay flat against the existing mirror as intended. With a spacer between the old and new mirrors, it may fit snugly enough to stick and pass the test.Not recommended.

I've seen reviews but can't always trust them these days. I ordered and received what appears to be a t100 type electric mirror. The mirror is too narrow and a bit too high. I got it to work because I needed a mirror on the passenger side before driving. I used quite a bit of black silicone sealant/glue to tape the edges and fill in the gaps. I completely disassembled my mirror and did not have the mirror in the housing when I installed this. Therefore only 1 star. However the quality of the…

After reading all the reviews about this mirror I decided to take a risk and bought it. Of course, it is not suitable for manual mirrors. The size doesn't fit them BUT I found this glass fits T100 with electric mirrors. I have two Toyota T100s, one with manual mirrors and one with power mirrors. The problem is that the glass is not flat, the mirror is convex, but the standard mirror is flat, so there is no way to "glue" the mirror to the mirror. Broken. Also, due to the 2D shape, I couldn't…