Fractal Design Meshify C: High Performance Airflow & Cooling PC Case with Tempered Glass - 2X Fans included, PSU Shroud, Water-Cooling Ready, USB3.0 - Blackout Edition Review

I bought it partly by accident - I was aiming at LianLi 205, but then there was a "promotion" and the difference in prices between them became not so noticeable. With its pluses (easy-to-remove filters, front mesh), it justified the difference. Selection subject to the criteria of white and ventilated, compact small. The case is relatively compact only by ATX standards. By itself, it is comparable to conventional large cases. It looks much larger even than a slim mATX case with a TFX PSU. If…

For 7500, to be honest, I expected better, but since everything is assembled in China, it is impossible to rely especially on the perfect fit of the gaps and the absence of jambs. In general, the body is good. Cable management is tricky especially if you have a non-modular power supply or hard wires like my seasonic. The body is very beautiful. If you move the bottom filter a little to the side, it rings barely)

Of course, I'm not an expert (to be honest, this is my first build), but the case is quite decent. I don’t really understand NZXT fans, because there are neither normal filters for you, nor functionality, and the design of fractals is better. I liked the case, but in order for the temperatures to be good, it is advisable to add two 140mm turntables to the front panel, and this increases the cost and you can already think about buying the same r6; it's better in almost everything except…

Pros: The case was good after purchase. And it would seem that what can happen to the body? Some cons: In February, I bought this miracle of Swedish design. In April, I decided to add memory to the assembly. He removed the side glass (screwless assembly!) And while holding it in his hands, it exploded - scattered throughout the room and covered the insides of the computer. I washed off the blood from the cuts, cleaned out the room and the computer, and started figuring out what to do next…

Personally, I had no problems with the "moving" to a new case. There were no problems with hards, as well as with glass. In order not to fix it anywhere, I assembled it according to the complete instructions.

As I understand it, this is the most compact unit on the market for ATX. Everything fell into a tyutelka, in the photo 5700xt

I was looking for the MOST compact case for an ATX board with the ability to install a large number of fans, dropsy and a top-end video camera and found this miracle, the case is very cool, and most importantly compact, does not take up space on the table and with the right turntables does not make noise at all, in general, see photo, who are interested, write to me in FB (sergeykobec), I will answer all questions ;-)

Excellent case, strix rx 5700xt entered without any problems, but it is not small. I put two 140 noctua on the front, and moved the regular one upstairs. Nothing heats up and does not make noise, only the vidyuha in the load sometimes gives out a hum, but this is more of a question for the asus. And yes, just in case: he does not fit into a gurney from ikea, she had to bend the sides.

With the write-off of bonuses, it turned out to be about 6700, after the sale of complete 2 turntables, the funds spent on this case are 5700. And for this amount, it is almost perfect, I changed the Corsair case (carbide series spec-omega white) to this one, it is perfectly blown, although it bothers me to tighten / unscrew the bolts that fix the side glass, very small hats, without the ability to turn them with a screwdriver.

Cleaning filters is a pleasure, no need to twist and drag this box =) A block 180 mm long fit perfectly (preferably modular !) VERY SATISFIED WITH THIS CASE =) Before that, there was an NZXT H440 with which I am extremely dissatisfied: paint flies off Carving is either guano or torn off The metal is thin! Polycarbonate scratches Cable management is DISGUSTING!

I needed a full ATX case, but one that was not too long so that it could fit on a stand that was placed under the table. It didn't look like there were too many choices. The appearance was striking and captivating. I have already installed the second system in it, and it is currently operating on the water since the nineteenth year.

Outstanding body. The materials and workmanship are of the highest caliber. The Ice Hammer IH-4800 CPU cooler fits perfectly despite its incredible height. A unique plug is supplied in the removable PSU case so that a 360 mm dropsy can be installed in the front panel.

In general, I am satisfied with the body, if you remove the minor jambs with fasteners (which, as I see it, nevertheless arose somewhere along the way) - I would put all five stars, because the rest is fixed at no extra cost Some pros: • Sufficiently thought out in terms of wiring - a lot of space behind the board, holes with shutters, etc. • "Uhi" for attaching ties in the right places • If desired, you can rearrange the front fans directly under the front mesh, which will give an additional…

I am very pleased with the design, and the tempered glass is pleasant, for its price (I bought it around 6t.) I consider it one of the best solutions.

I gave it to my husband for the new year, he asked for this particular building. I was very happy, 7 months have passed, nothing has changed

I took it in June 20, at the moment I use the third month. It looks great, there is a small jamb with a front headphone port - a bad connection, apparently a factory defect (it is corrected if the slightly inserted headphone jack is moved). I didn’t take it by marriage, I very rarely use the front port. The ease of installation of components pleases. It is a pity that there is no thunderbolt - it would be much more convenient to work. Yes, and 3.2 yusb would be useful. In general, I really like

All in the minuses indicated. Do not take this body, only if for the sake of beauty. There are cases for such money that are no worse, and even better, in terms of cooling, and externally. If it cost 3500-4000 thousand, then you could take it, but not for 8. Its pros: Compact In principle, everything is arranged conveniently At the expense of the quality of parts, well, I don’t know, not a pro. material as material. Appearance Got cons: The most important minus is 2, motherfucking, cooler, for…

All liked it. I assembled the PC myself and everything was very convenient. cables / wires stretched and brought out without any problems. everything is provided.

in the s2 version, the beauty was improved by removing the bolts from the glass and adding type c to the front panel, but given the difference in price for May 2022, version C is more attractive Some pros: a lot of them. After standard "cans" for 2-3 thousand, the difference is very noticeable. It is very convenient to lay wires, the power supply with removable wires climbed with a bang. Many such trifles as: fasteners for hard drives 3.5 with vibration dampers; screws that do not fall out, but

The best case I have ever used Has pros: - nothing creaks, does not play, does not bend - sled for HDD with already glued silicone seals - an unrealistically large amount of space has been allocated for cable laying, if you are too lazy to bother much about how to lay it, this is a 100% choice for you - there is no need to remove the entire front panel, just remove the front mesh to install the cooling system - complex coolers are quite quiet Different cons: Yes, there are no direct strong…