GasTapper Siphon Pump - Pro XL Fuel Hand Pumps: Efficient Gas, Diesel, and Water Transfer with 8 Ft Hose, Anti-Kink Spring, Shut off Clip, Jiggler, & Hose Retainer Clip Review

Didn't work for draining petrol from a car The ball valve didn't fit the tank of the Audi A4 etron or Honda HR-VT at first Disassembled, attaches the suction bulb and plugged the hose in all the way - pumped up strongly - Audi a little from half full tank - Honda no There is nothing wrong with this thing, it looks and feels high quality and maybe I misused it somehow But plug and play does not pump you old gasoline from a car tank while protecting yourself on the spot. It might not deserve a 1…

Make no mistake about it. So many of us have bought some sort of "cheap" siphon kit and found that it is actually CHEAP and not worth what we paid for it. I've tried and tried to pump old gasoline out of my Honda alternator with one of these. Finally gave up and (with help) poured the petrol out of the sink. I use my generators a lot, but not so often that I always run out of fuel while it's still good. I did some research and bought this set. I plugged the tube into my generator, squeezed the…

I see mostly high ratings but some 1 star ratings. Structure as in the video. Daylight squeezed out of a lightbulb with an arrow pointing in the right direction. The tube fills up and flow stops when compression stops. Why? No creases I have contacted the manufacturer. and look forward to satisfaction or replacement of the disposable bulb if I change my rating. Meanwhile - defective garbage goes in the garbage. Producer. called me and said the only way to use the black bulb was to 1) position…

I liked this siphon - this part works well - but I didn't like the fact that the brass fitting got stuck in the car's filler neck and I almost lost it in the gas tank. Do not lower this brass part into the fuel tank! Modern cars have a little spring loaded door that grabs the brass and pulls it out of the hose on that siphon! Be sure to use a funnel to keep the car's fuel filler neck open and don't put scrap brass in it! This could be improved with some guidance on the brass yoke and perhaps a…

I bought these to pour the last bit of water out of my above ground pool that I got for the kids. The copper-brass primer shaker works perfectly. However, pressing the bulb is useless. It compresses and doesn't pop out to compress again unless I pull the suction end of the hose out of the water. Not enough force to pull water through hose. It works great for pumping air, but once the end of the hose is submerged it stops working. Very disappointed and now I would like to get one of the ones…

This siphon works very well! However, be very careful when manually pumping liquids out of areas where debris may be present. The filter inlet that goes into the squeeze ball is VERY LIGHTLY clogged. You need to stop pumping, drain the hose and clean the inlet to the filter. DO NOT LET GARBAGE GET INTO THE PUSH DEEP! This little inconvenience is a real pain in _ _! It is difficult to clean the intake area. Don't get me wrong, the overall performance of the siphon is very good. Just be careful…

A siphon is a siphon, and all siphons obey the same physical laws that make them work. But some are more equal than others, and this is the greatest of all equals. It's very well made from quality materials that are made in the USA, but the many accessories that come with this device give it many features not available in other devices. The hose is made of clear, durable ⅝" vinyl made in the USA. Some other devices also have a ⅝-inch hose, but these are few and far between. If the tubing is too