🔧 Valiant Cabinet Hardware Jig: Drawer Knobs and Pulls Template Tool for Wood Drilling - Adjustable Drill Guide for Boring, Mounting Door Handles (Improved Version, Aluminum) Review

The product is easy to use. It took me a while to figure out how to use it (I had drawers and doors to attach handles). Once I was familiar with the operation, the installation process was a breeze. Now it's one of my favorite instruments. A few tips: 1) Practice assembling and setting up the unit before attempting to use it on your cabinets. 2) Protect the surfaces that come in contact with the tool to avoid scratches. I used painter's tape on the top of the drawers and doors and it not only…

I found the drill bit that came with it to be blunt and small so it moved too much in the pilot holes. I used a set of drill bits to find the best fit and used some soft side clips to hold the guide in place once set for drilling. Otherwise, it will move too much if you only use it with your hands and will be too uncomfortable. ALL lights of the same design have the same problem. I suspect that only expensive American devices will be better (3 times more expensive). I've found this bracket to…

Pros:* Easy to read indexes* Convenient storage case* Parts look well made ie. no burrs, rough edges or poorly finished surfaces. the end of made-to-measure furniture for life. Cons: * Sharp corners on the index rulers and the black depth guide that should be loosened up a bit. *Halfway through a job (about 40 threads installed) a steel set screw had already ripped off the black aluminum depth guide, prompting me to use duct tape for secure positioning and curse its design. There should…

The T ruler was square but the holes are not square when you flip the device to make another door. The holes would not be the same height and would not be vertical. I believe part of the problem is the side edge stop, it doesn't seem to line up with the ruler. I messed up the first door I made, I had to adjust it to get the rest of the doors close enough and spend a lot of extra time making pencil marks on each door to make sure it was square, that takes all my mind off why i bought this…

When my husband and I were told we would be charged $3 per hole to professionally install kitchen cabinet hardware ($4 if they actually screw on every handle), we were SHOCKED. absolutely SHOCKED. You can easily pay more for installation than for the actual handles! So I IMMEDIATELY looked for alternatives that were accurate yet effective so we could do the installation ourselves. I came across this product and was very impressed by the reviews. Unlike plastic templates, this one was sturdy and

I purchased this product because I was looking for a tool that would allow me to easily and accurately install new cabinet hardware. I have a couple of doors and drawers and it was important to make sure the new hardware lined up with the adjacent door/drawer. Using a tape measure with pencil marks and drill holes (essentially aimed at the eye) doesn't help. Another issue that bothered me was the variety of hardware handle lengths - from 4.5 to 14 inches - as such a tool eliminated many of the…