🔌 Metra 70-1730 Amplified Wire Harness for HONDA 2008 and Newer Models (Black) Review

Metra has always been my go-to source for wiring harness adapters when upgrading my factory stereo, so I didn't want to try looking elsewhere. They are always of excellent quality and require very little connection.

Wiring harness is good but no bracket or instructions! I bought this suspension for a premium 2011 Honda Accord, everything worked fairly well except for the dimming function on a Pioneer Avic 7000Nex that I installed. When I looked closely there were two wires in the wire harness for LIGHTS AND DIMMER, but when I look at the OEM car wire harness these wires are not connected to anything (there is no contact on the OEM side for info). As a result, I connected the dimmer wire from the sapper…

Used to connect a JVC KW-NT500HDT to my 2008 Honda Accord EX-L 4dr V6 with 6 disc changer (now removed) and Premium Audio (not removed). . The JVC main unit features pre-outs (front left/right, rear left/right, rear left/right) and the ability to turn off the internal amplifier, reducing internal heating. If your head unit only uses the built in amplifier and does not have preamp outputs then this is the wrong harness. INSTALLATION NOTES: NOTE THIS: If you intend to use the steering wheel…

Metra всегда был моим фаворитом для адаптеров жгутов каждый раз, когда я обновлял свою заводскую стереосистему, поэтому я не собирался пробовать искать что-нибудь still. They are always of excellent quality and require very little connection.

Works as advertised but wish they had pins and wires for ALL OEM wiring harness pinouts not just audio wires. You still need to disconnect wires #5 and 16 from the original wiring harness for the steering wheel control unit. Please note this is for a Honda premium amplified audio system. Not all harnesses have RCA left and right front and rear outputs and a subwoofer output. Don't forget the skin and antenna adapter either.

Wiring Harness Good Quality But No Support Or Guide! I bought this suspension for a premium 2011 Honda Accord, everything worked fairly well except for the dimming function on a Pioneer Avic 7000Nex that I installed. When I looked closely there were two wires in the wiring harness that were meant for LIGHTING AND DIMMING, but when I looked at the OEM car wiring harness these wires were not connected to anything (there is no contact on the OEM side for info). As a result, I connected the dimmer…

Used to connect JVC KW-NT500HDT to my 2008 Honda Accord EX-L 4dr V6 with 6 CD Changer (now removed) and Premium Audio (not removed). The JVC main unit features pre-outs (front left/right, rear left/right, rear left/right) and the ability to turn off the internal amplifier, reducing heat inside the unit. If your head unit only uses the built in amplifier and does not have preamp outputs then this is the wrong harness. INSTALLATION NOTES: PLEASE NOTE THESE: If you wish to use the steering wheel…