Milwaukee Pack Circular Aggressive Stainless Review

I had to cut the heads off the 3/8" zinc plated anchor bolts to use as the poles for my floating shelves and these blades cut through them like butter. I could do this one Don't finish project without them and they worked great.Highly recommended.

I have struggled with several methods and products for cutting sheet metal roofing. It works, cut a straight line. Watch out for sparks, there are a lot of them, so wear gloves, sleeves and safety goggles. I also found that the blade wore out faster when I was cutting multiple sheets at once.

These blades really do cut as advertised. I used them to cut roof sheeting. I gave them a 4 instead of a 5 as they wear out much quicker than I would like. I eventually switched to a traditional, rear-mounted cross blade and will not go back, at least not for sheet metal. However, I still use Milwaukee blades to cut other metals.

I used them to cut a 100 lb propane tank in half around the weld down the middle. I had to do this with two drives. The first cut well up to halfway, it just didn't cut anymore. So a second one had to be used, I think the 3/16" thick galvanized and split steel was only about 48" so 1 disc only lasted 24". When cutting it was fast.

Early in the blade's life it cut very well and certainly cut deeper. The track parts could then be handled since they weighed much less than the whole. It was much quicker than using a cutter. All in all a great product. If you have similar needs, this is the way to go without buying a plasma cutter. The track sections were 12 feet long and very heavy. a person.

I bought this for light sheet metal cutting jobs. It looked like it would cut perfectly, but then the middle came out. I put another one in my saw and it broke even faster. Glad my brother was there. He suggested I take an old saw and put it in reverse, and that's how I got the job done. I got them long before I got to work and needed them. But now it's too late/the return date has passed.

I was asking if anyone had measured the thickness. No reply received. Maybe it's because fans don't want to admit that the product specification is A LOT wrong. They are not "0.9" 3/32" 2.4mm thick! Their thickness is 3.1mm. It's over 20% thicker than the spec! This is not a very thin cutting wheel like it says on it's own Chinese standard scrap is specified, if you order something online the written specs must be correct as that is all we need, especially if no one who already has it wants to…