🔧 Maximize Your Drilling and Driving Potential with the Milwaukee Shockwave Impact Drill and Drive Driver Bit Set (40 SET) Review

I work as an engineer in a data center and use this set every day and don't even try to lighten it up. I've managed to break a drill after quite a bit of abuse (the smallest) so far, but the biggest challenge is keeping them from getting away. They almost always remove the screw without scratching it, and the bits are nice and tight in both the tool and the fasteners. To be honest I enjoy using this set so much that I bought a set for home use which is probably total overkill after seeing how…

This is a decent set of percussion tips from a reliable company. At my current job we use a lot of structural screws that require a T30 Torx (star) bit and of course this set doesn't have them. It comes with extra T25s and just a T20 or two. The case has a nice design but oh my god some of those parts are hard to get out! You overdid it with the narrowness. The trick is to pull them forward a little as you pull in the pose. It works maybe 90% of the time. The rest you have to wiggle, tug, swear

I bought this set primarily for 3/8" and 1/2" adapters to use a new impact wrench with socket set. I was very excited when I received the product because it looked like a quality product. The case is of very high quality and the tools also seem to be of high quality. Turns out that wasn't the case, as I found out very quickly. I used a 1/2" drive adapter with a set of impact sockets and when I removed the bolt it sheared completely. The bolt wasn't seized so the tool wasn't even producing…

Absolutely the worst screwdriver set I have ever bought. I've had a lot of kits from different brands but never Milwaukee. Since almost all of my tools are Milwaukee made and I love Milwaukee drill bits, I decided to buy a set of Milwaukee bits to go with my plumbing drill bit. Every bit I used bent or broke on the very first use. I even had a torx bend and then broke it instantly just by removing a screw on my truck that went into the plastic holding my reverse light. Remember it was screwed…

I bought this set with a new beat because I wanted as much variety as possible and wasn't disappointed yet P2 so you have a few extras if you grab it. If you look at the photo, I remade the holders to make room for the 5/16 drill bit (which I'll be picking up tonight). actually) and there are some blank spaces. that's what's missing, which I'll add soon to make it one of the best kits for most. Wrench T10 TorxT30 TorxT40 Torx7/16. Impact wrench because you'll be reaching for it all the time…