🔧 OWC Hard Drive Installation Kit for Lower Drive Bay of 2011-2012 Mac Mini Review

This adapter kit fits my late 2012 Mac Mini perfectly. This is an interface cable to connect the drive to the second SATA connector next to the main drive and some standoffs and screws to attach the drive to the hard drive bracket. But remember that the screws need to be tightened deep into the lugs to get everything in place and not just tight like I initially assumed. If you don't tighten them enough, the original hard drive will not fit properly in the guide hole, causing the front edge of…

I bought a cheaper upgrade kit that came with the top and bottom drive bay cables, but didn't want to upgrade until I tried installing macOS Mojave on mini. He told me that the current drive has a SMART problem and I should backup and replace the current drive. So that's what prompted me to upgrade. I couldn't find the cheap kit I got so I ordered it direct from OWC. I also ordered a 480GB Crucial BX500 hard drive and a 1TB 7200rpm WD Black hard drive. The OWC video was excellent for the most…

The two supplied ribbon cables did NOT work. If you repair your own Mac. Get the IFIXIT TOOL SET (which also works with TORX screws on BOSCH dishwashers) and some cheaper New Tech tool sets (which aren't great, don't magnetize well, but are better than the tools included in this SET). and are the ONLY TORX TOOLS thin enough to reach the IMAC SCREEN screws. IFIXIT produces QUALITY INTERNAL COMPONENTS and QUALITY TOOLS. This kit is almost a joke. I like OWC repair videos but the equipment is not…

This kit works very well. It's not that easy, but if you're patient and careful, it's doable. The included documentation was excellent! If this isn't clear enough, there are also some videos on the OWC website for further explanation. In addition to the tools included in the kit, small needle nose pliers will come in handy. I came across my drive which was in the "top" bay after already disassembling it, but I learned a few things in the process that might help others so thought I'd share it…

I was looking for an SSD install kit to install a second hard drive in my Mac Mini and this was the perfect solution for me! The instructions in the guide are very simple to help you take apart and put back together your Mac mini. As a former Apple tech, I highly recommend ALWAYS reading on before attempting this. Make sure you read all of these instructions carefully and make sure you have all the necessary tools BEFORE attempting this! I would also make sure you have an anti-static wrist…

I almost went with the more expensive iFixit kit but it was perfect for my 2011 Mac Mini. The plug and parts are excellent quality, I inspected mine carefully so I didn't waste time finding it defective after installation. As for the installation, it wasn't difficult at all. I'm pretty daring with electronics but by no means an expert and it was relatively easy for me. Be sure to order some spudger sticks with this set if you don't already have them. A few installation tips: 1. Be very careful…

This kit is amazing. I bought it here at Revain a few months ago and just started using it as I was scared to make this upgrade after reading about it and seeing how many steps and delicate components it took. The hard drive assembly is almost the last piece left in the mini case before you can remove and upgrade it. I have to say I'm impressed. The kit contains all the necessary parts, including four Mac-specific screwdrivers to remove and replace the necessary parts. What really pleased me…