Permatex 09116 Fuel Radiator Repair Review

He completely restored the rear window heating, after half a year everything works. I cleaned well and applied the composition abundantly . everything was according to the instructions . I restored about 10 threads . everything works, I am satisfied with the result.

Some pros: In my opinion - the best tool for restoring glass heating filaments. Got cons: Liked everything. Although, the brush for applying the composition, included in the kit, could be made a little thinner.

I haven't used my plastic heatsink in over a week. I followed the instructions for sanding, cleaning and rolling. It never got hard enough and melted from the heat of the radiator. Might work better for fuel tanks.

Cleaned area, all paint removed, sanded to bare metal, cleaned with alcohol, epoxy mixed to a uniform gray colour, pressed into hole per instructions etc, left it building up overnight. As soon as there was pressure in the tank, it started to flow. Don't waste money. Take it to a radiator repair shop.

It didn't work on my son's Wrangler plastic radiator at first - after 3 hours it still wasn't cured. Since it's epoxy, I thought the extra heat might help, so every 10 minutes or so I'd go to the garage and heat the patch up with hair dye on high. It took another hour +/- but by then he was fully healed. It was enough for a 6 mile drive to the cooler shop where we bought a new cooler so it did what I needed.