Proto Pasta CDP11705 Composite Conductive 1 75 Review

I am using this to print capacitive touch panels for a product I am making. Once it's set up, print quality is pretty good, although there is some sacrifice in durability and layer adhesion compared to regular PLA. It really makes the number on the injectors. Filament cleaning is not effective. I ended up resorting to simply changing tips after using this material. I am using the 3rd coil and it is not compatible with the first two. It seems almost twice as brittle as the others and keeps…

I would give conductive PLA 4.5 stars if I could. It's a little pricey, but I only use it for small limited runs. It worked great for the responsive stylus I was typing: http://kfkdesigns.com/stylus/. I followed the manufacturer's recommendations and increased the print temperature (basically treating it like ABS) and it printed fine on my Simple Metal. I also used a heated platform just to prevent unwanted buckling. I noticed two downsides to the filament: (1) reduced layer adhesion (always at

This is exactly what I wanted. I can use it as a low temperature solder and apply it directly to the metal wire to make low resistance connections. This plastic seems a little less stiff than regular PLA, I didn't find brittleness to be an issue. vary depending on the voltage potential on the plastic. Measuring the resistance of my first circuit (without connecting voltage of course) disappointed me with a very high number; However, when I turned on the device and the LEDs flashed, I wasn't…