Universal Projector Ceiling Mount, White - QualGear QG-PM-002-WHT Review

This is one of the many, I mean the many ceiling mounted projector stands I've installed over the 30 years of Projection Animated Attractions that we manage and work with, some of which are Six Flaggs , Universal, Utah Lagoon and Disney Company. This particular stand can be seen at the opening of Halloween Scare and Scream 2018 at the FrightNight attraction at Lagoon Theme Park, featuring menacing scenes in different areas of the porch entrance. Also a nice thing, writing a review doesn't have…

At first it didn't seem like it would fit my Epson 5030UB as the mounting holes on the projector have a special configuration which is between the large and medium levers. . The instructions don't mention this, but if you completely remove the 2 screws holding the legs you can shorten the largest arms even further (align with one of the holes) and then add the screws back in. This made it possible to achieve a perfect fit that does not require any mechanical processing. There are many different

This is a great mount that comes with lots of hardware and good instructions that will meet most mounting scenarios but it's not one size fits all so I had to go with it the star out. This will fulfill most scenarios, but there may be some issues. 1. You cannot easily install it on a sloping ceiling. I got this mount thinking its long legs would provide optimal support. The legs come in 3 lengths but it turned out that the medium ones are too short and the long ones are too LONG to use the same

I bought this mount over some others for two reasons: The projector screen I bought was Qualgear and the quality of the product which I found to be quite good. I wanted a corresponding product line. The box arrived and was smaller than I thought it would be. The materials used seemed pretty durable and the second reason I bought them was because they gave me the option of using a telescoping pole or mounting it closer to the ceiling. My screen sits about 1.5ft below the ceiling because it's…

This was my second attempt at a mount for my new ViewSonic PRO8530HDL projector. But I have a strange setup with the shape and composition of my area. I have cathedral ceilings in my great room so I knew I wouldn't be propping this off the ceiling. But I have a 3/4 floating wall between the kitchen and a large room with closets on the other side. I decided to use one of these brackets, but "upside down" from its normal hanging position, and use it to mount something ABOVE when it was attached…