🔌 Upgraded Shaluoman Mini PCI-E Adapter for Enhanced Compatibility with BCM94360CD/BCM94331CD Review

This worked great in my MacPro4,1 with BCM94360CD card. I only had to use one of the screws to hold it in place as another screw would interfere with the antenna connector, but it was enough. I used https://www.amazon.com/dp/B00YM0HN0O to extend the bluetooth antenna cable. To cleanly install the side USB cable, I grabbed one end of the cable from https://www.amazon.com. /dp/B075ZW71VM (yes, wasteful for just one) and redid the connector with only the red and black wires in the correct…

Installation was easy thanks to previous comments. Here's what I did and it works great.1. Remove Wi-Fi and Bluetooth cards.2. Insert a new Wi-Fi/BT card into the adapter. Expect some pressure to put it.3. Insert the adapter into the Wi-Fi4 card slot. Convert the included cables to a 2-pin, female reversible USB cable. The easiest way is to simply strip the wire ends of the two cables provided (leaving the little white connectors on the ends) and twist them together, black to black and red to…

The description says 1. Easy Installation, Plug and Play Because when you pull out the bluetooth motherboard wiring harness, remove most of the wires and gold connectors with a magnifying glass, knife, bright light, and solder 4 very small wires together to create a new special connector to "just plug and play" the bluetooth data cable to the motherboard? Are electrical engineers a target market? I had to do a lot of research and do some cumbersome hacks to get my machine working again. In…

I tried to buy this item but it was sent back to Revain so I bought it on eBay. This seemed like the right place to give some installation advice. I used this kit on a 2009 Mac Pro. If you have read other reviews and viewed photos here and elsewhere you may be confused. Here are a few points: 1) I used this kit without purchasing 4 pin connectors as shown in Michael Dingwell's review. Because the 4-pin connector is not used, you don't have to swap the black and red wires. I removed the…