Flexible 8/10/12mm Soft Silicone Bending Insert: Ideal for Shaping Acrylic Rigid Tubing Repair (10mm) - A Must-Have Accessory Review

It works great. Haven't done any bending before but I know it works well with Bitspower 12x16mm acrylic tubing. and as you can see the tube goes in better as you can see no problem. I'm updating this review and I'm starting to flex

Too small for 10mm PETG tube with 12mm OD. It glides with no resistance / sloppy landing. This creates shallow bends in the tubes. Waste of money and expensive pipe.

Couldn't do better, some soapy water and it slides right in and out to bend tubing. I have used it with acrylic tubing which makes the silicone resistant to very high temperatures not to mention the length which should be more than enough to make bends on long tubes. Overall everything worked as intended and the quality could not have been better.

I bought an 8mm silicone wand insert and asked for expedited shipping. They delivered a good product and arrived a day before the main delivery date. The insert fitted nicely into the 8mm ID tubing I was working with and I had no trouble twisting around the bends. It was easy to remove and I was even able to put it back into the tube after bending it to fix some alignment issues (remember to use a drop of dish soap in a bowl of water to ease the insertion into the tube facilitate). I would…

I bought 12mm but it doesn't fit like it should, it's too small so I couldn't use it , I got it the shorter 12mm piece that came with my water cooling kit is perfect. The side did not quite fit and leaves kinks in the pipe.

This silicone is perfect for my petg probes. He did an excellent job of preserving the internal structure of the pipes. I seriously can't believe how neat the curves were! While the fit was perfect and the curves so beautiful, there is a catch. A mixture of soap and water must be used to remove silicone easily. Even with soap and water, it's almost impossible to pull the silicone out of a bend greater than 90°. I tried making a 130° bend but couldn't get the silicone out (so the tubing was cut…

I bought this to connect a 16mm diameter PETG pipe but it doesn't fit at all. The diameter of this silicone insert is 11.3 mm. Invalid description. I lost time