🚀 SPEED TIGER Carbide Square Mill Cutting Tools: Precision and Efficiency Combined Review

I have used and abused this drill bit to cut and route 2 lower AR receivers on my drill press. At the end of the second he started to blunt. However, I abused it when cutting aluminum and it worked really well. Remember that you will need to increase the speed of the drill for it to work properly with these bits. Much of the material has been removed to complete 80% of the receivers below. I would recommend and will definitely buy more for future builds. I had no problems with it breaking…

I needed to cut cold rolled steel on my desktop CNC. In general, steel is not the type of material you want to cut on a benchtop CNC, which is usually not as hard as it needs to be. But with some well thought out feeds and speeds it is possible. I bought a set of 2 tooth end mills - ISE1/8"2T. And I'm very impressed. I ran the machine at 15,000 chatters, the cut is smooth as butter and the final pass left a very nice finish The edges of the cuts you know what else the packaging of the end mills

Bits were ordered to solve my milling problem. First a little background - I have 2 CNC routers. One is assembled from a kit, the other by an American manufacturer. I use Vectric CUT2D software to create G-code. One of my projects had relatively small letters with a "stencil" font, so there were no unsupported parts of the letters. I tried using V-Bit but as it went deeper the sides of the letters became too thin and fell apart. The smallest end mill I had before buying it was 1/8 inch. My…