🔧 SPTA Stainless Steel Rotary Extension Shaft Set - 75mm, 100mm, and 140mm, 5/8"-11 Thread - Perfect for Rotary Polisher, Car Polisher, Polishing Pads, Backing Plate Electric Polisher Review

Nice little set. Use them all the time to polish things up. It took a little while to understand the differences between each pad, but after a little research on my part, it was easy to use. But I like them and they seem to be holding up well.

This is a must-have item. The only reason I find it easy to use 3 is because I want it to include a wrench. When the extension is tightened and you want to remove it from the baseplate, it will not unscrew - you will have to use pliers to hold it. Great durable design and of course it will last a very long time. Time.

I was a little skeptical about the buffing pad at the end of the long shaft but I tried cleaning some of the aluminum wheels and they were too deep for the buffing machine. I was pleasantly surprised at how well they worked. They fit well and are very durable. They are a bit difficult to polish with, but I was still very pleased with how well they worked.

. Gaskets received in about 2 weeks. Haven't used these pads yet. Contacted the seller to better understand the usage. Here is my resume. Pad Colors: 1. Yellow is hardest, for heavy cutting 2. Medium Blue 3. Orange Light Cut4. Black is softest for finishing cushion surfaces:1. Flat-high cutting for flat surface2. Cross cut for a flat surface3. Wavy Smallest Abrasive for Uneven Surfaces Hope this is helpful.

These pads are very durable. Used two of these with a 3/8" drill bit for about 6 hours to remove water stains on a glass shower door. Then I polished two copper sinks with two more pads. Cleaned them and could hardly distinguish them from new ones, has held up very well. I ordered some cerium oxide for polishing glass and copper but it didn't work very well and I ended up using a car polish paste. The compound worked much better but still a lot of work to remove hard water stains.

An excellent kit for small touch ups and hard to reach areas. After receiving this package I immediately set about polishing the B-pillar frames of all my cars/trucks. Worked great, used the orange cutting pad with HD Speed All-In-One Polish and they look amazing. I used my Ridgid 12V small cordless drill and had no problems. There is an overview with a detailed description of all colors and the degree of their "cutting", these are the standard colors in the industry. For the price this is a…

Although listed in the frequently purchased box on the Mini Buffer page, they will not fit the M14 thread on the output shaft as they are 5/8-11 on both ends - have thread. You will need to adjust M14 on the machine to >5/8-11 and then on the skid plate back to 5/8-11->M14 if using the skid plates that come with the mini bumper. As a side note, these extension shafts fit the output shaft of my 4-1/2" Bosch variable speed grinder without an adapter. (You will still need a 5/8-11…