NT90 AC120V 10X Tnisesm Connect Terminals Mounting Review

Great little block. I have a tiki stone god in my backyard that I built and made a cigar for him. I had to turn on the ash light and smoke machine at the same time, except the LED is 12V DC and the smoke machine is 120V AC. I used 12 volts from the power supply to the switch and connected the power relay to the output, then the 120v fog removed from it works fine. The only reason it didn't get 5 stars is the mounting flanges, they are complete rubbish. Both devices were delivered in a bag with…

Yes it is a relay but the added function made me want it. All spade terminals are recessed into the groove, making them even safer when using high voltage on the contact terminals. They even come with crimped wires for easy installation. - Contact tabs are not the "standard" size you see on most devices, but are smaller (they can come in 8 different sizes ranging from 1.5mm to 6mm wide) and you need to take this into account when using want to crimp your own cables. I have both clamps and…

Many years ago I built a fan for the whole house. I connected it to 2 separate switches to control the fan. One to power the fan and a high/low SPDT switch (to prevent both windings from being powered at the same time or causing a fire). Then I decided to update the Zwave switch and the same high/low switch but. He kept burning the Zwave switch. twice. I replaced it so I decided to use these instead (MUCH CHEAPER!). I then replaced the high/low switch with a Zwave switch and redid the wiring…