🚗 Twidec/5Pcs Waterproof LED Lighted Rocker Switch Toggle 12V 30A SPST 3 Pin On-Off Blue Round Dot Switch for Car Boat Marine ASW-20D-BU: Enhance Control and Safety in Your Vehicle or Vessel Review

Oh, be careful with those switches. They are not what they seem. They are actually CHANGEOVER switches. The LED is shorted out by the switch when they switch to the "off" position. Although it is not shown on the PIN identification sticker. I used them as slave (or parallel) switches for my application, assuming they were SPST if SPDT. He closed the center contact to ground, which I connected to the cathode of the internal LED. Luckily the fuse took the brunt and my controllers seemed to…

I confirm that the diagrams on Revain are correct. What is wrong is a small sticker on the back of each switch. As others have said, GND/Earth is the pin directly under the LED. The middle pin is connected to the positive side of the battery. The last pin or the pin opposite the LED connects to the positive side of the lights or whatever you are trying to control. The negative side of your battery and the negative side of the lights you want to control are connected to the GND/ground of the…

I installed emergency and work lights on the back of my lawn tractor to prepare for the snow clearing season. The project couldn't be easier. My first complaint is that the threaded barrel uses VERY thin threads. This wouldn't be a problem if the barrel was metal or hard plastic, but neither. Walnut is very thin and very flexible. So flexible that the nuts could not press on the sockets. I had to go to the hardware store and buy steel nuts. This helped, but the switches went in the trash due to