Enhance Your Jeep Wrangler JK with LEDKINGDOMUS Front Bumper - Rock Crawler Style, Built-in LED Lights, Winch Plate, D-Rings: Compatible with 07-18 Models Review

Sorry no photos. I was in a pinch. You get what you pay for. This bumper looks great. But, the receiver is so weak, it would not hold my trunk carrier with a couple bicycles. Just bikes, nothing else. The first time we loaded them, we went back in the house to make our picnic lunch, and when we came back out the rack was about 3” lower to the ground. I thought it was just how we parked. After a 20min drive, we pulled into the parking lot. I heard something scrape, but there wasn’t a deep dip or

after installing this bumper onto the 2011 Jeep Wrangler 4dr, noticed that we don't have clearance to close the tailgate. When you purchase this bumper make sure the spare tire is going to clear the top of the bumper or that the space tire carrier is out from the tailgate enough to close the trail gate. On my mod I will have to have a spare tire relocator to bring the tire (255 R75 17) out from the tailgate about 2" inches to be able to close the tailgate. The tire will fit into the dip on the…

Got this budget friendly rear bumper for our JK and all the bolt holes lined up perfect with no modification/drilling required. Removal of the OEM bumper was easy but the instructions that are included are not very good or clear on where the 4-hole plate goes?Would of gave it 5 stars but the angle of the bumper after installation makes the led lights shine in the upward position. (about chest high if you're standing 7 feet away)All hardware was included and no damage from shipping.

The bumper is sturdy and looks great! Easy to install. However between the way the bumper was wrapped and the company handled the package(the box did say "Fragile.Handle with Care") one corner of the bumper was protruding from th box and the powder coating was chipped away. I was so excited to finally get my new rear bumper on my jeep that we went ahead and installed it. At some point I will have to have it touched up.

Packaging was damaged badlyThe bumper at first look, looked great but after attempting installation found it to be twisted when I opened my back door it ground on the bumper on the hinged side.After close examination I could see it was twistedIt was very hard to line up the holesI had to put a long construction bar in the trailer hitch to bend the twist out it took 300 lbs to bend it backInstead of about 20 minutes to install it took 2 hoursAnd there were no instructions for the light hookup…

Good fit and looks great. Instructions are barely useful so use YouTube if you get confused. As with others, the bumper arrived with a perfect looking box and was packaged very well but as seen in the pics the edges were chipped. I expect this to rust in 6 months and I will have to recoat the whole thing. Too heavy to ship back and I’m sure the seller counts on this.

The package arrived undamaged. It was packed and wrapped with care. Installed on 2017 Wrangler JKU. There were no installation instructions however, it was still an easy install. Install time was about 2 hours with basic tools and you will probably need some assistance to mount it. I wired my LEDs to the reverse lights. You can easily tap into the driver's side tail light to get to the reverse light wire. You will need extra wire to run to the tail light. The black wire goes to the black wire…

Overall, nice looking bumper. The welds are not exactly the best looking but I was not looking to spend $600+ on a bumper. All lights worked and not seeing any flicker. I hooked two of the lights to my foglight switch and bought the wiring and pod for the others.Like others have said, the box was beat the heck up and torn. I will have to watch the corners to make sure it does not rust.

Well shipping was fast. Ordered on Thursday came on a Sunday. Had to help the driver carry to my garage. Didn’t really follow the directions. The video on the advertisement was pretty much self explanatory. Not sure why they wanted you to change out the 8 bolts that were already on your tailgate, but we shall see. Package was slightly damage but the bumper was packed really well. Looks good and super easy to install. It took me two hours (an hour getting that darn OEM tow hook off) we shall see

Pro's - Bumper came in a day early, easy to install, decent steal & texture quality, looks great, cant beat the price.Con's - instructions unclear but able to manage if you're mechanically inclined.This isnt one of those high quality heavy bumpers/tire carriers that start at $1000+, but it looks great and made from decent steel and texture (havent taken it wheeling yet so I cant comment on the durability)But for the price of $400 it's a great buy especially if you're carrying a bigger tire than

Overall I do like the bumper. Reasonable price and not difficult install. But that tire extender needs to be better. It kept coming loose and warbling side to side. I eventually put two hefty metal screws in each side. This resolved my issue. Remember lock tight it like someone is going to steal it. also spend the money and get some bump stops to help with the jiggle that is left.

Installation was pretty straightforward, and everything needed was included with the package. I installed it by myself, but having a helping hand would be ideal. The holes for the winch was a perfect fit. Mounting the fog lights can be a bit tricky, as there is not much room to put tools behind the mounting holes. I installed this with in an hour. That is including the removing of the stock bumper and installing the winch.Overall, I am very pleased with the purchase.

Instalation was fairly easy. Did by myself in 2 hours. Bumper itself is really good, but the problem is the tire carrier. It definitely doesn't seem like it will be able to take a beating on trails for sure. all bolts and connections are tight and I can wiggle/shake the wheel and see the metal that connects twist and move.

I been wanting a set of off-road bumpers and got this pretty discounted so I bought them. They took a week to come in which for the weight isn’t bad. I real like the front how it comes up to the fenders but the back one where the tire mount is was Really wobbly. I ended up drilling holes on both side ( cuz it on bolts on the top with 2 bolts ) and put a nut and bolt on each side which really help the play. Other than that I really like them. Don’t get me wrong all jeep have rattles so the back…

Bought this for our Willy's truck on a gamble we could make it work.With some very simple fabrication of brackets to mount it, it fit very nice.The winch holes were perfect for a Smittybilt XRC 9500 winch although we needed to fabricate a mounting plate to move it forward due to the grill projection forward of the front of the truck.The LED lights came installed and ready to wire and all work great.Overall, very happy with the bumper and recommend it.Good value!

The bumper is solid but the spare tire mount needs to be stronger, tire bounces around alot had to do some fabricating The included winch plate may not be strong enough to handle heavier winches, limiting its compatibility!

Looks very nice but not what I would consider sturdy. We live in an area with lots of deer and I was hoping for something sturdier. The fog lights are awesome.

hated this bumper at first but after I busted out my miller 251 and made some improvements this bumper is excellent. Note the powder coat is junk be ready to have it sandblasted and recoated soon. But for what I paid for this I'm happy

Everything was accounted for in the packaging. I ordered the product with a discount for damaged packaging. The bumper was clean and looks nice. The wiring was easy to install and all the lights work well. I gave it four stars because the fog lights aren't straight at bugs me a little but overall worth the money so far.

The video explains it all. Will be looking for a better solution to use with this bumper since I like the design. But im afraid as much as it moves it will eventually break and ill loose my spare. I sent a message to the company but got NO RESPONSE!