🔴 Vaper 19419 Red Spot Spray – Non-Aerosol Sprayer (Red), 32 oz. Review

This product is a replica of a more expensive American tin. It's cheaper to buy than the expensive one we already had, so we bought this one. When we were poured into this liquid and charged with air, the nozzle leaked constantly without pulling the trigger. I had to depressurize and empty the bottle. We found a grinding residue in the can that was blocking the nozzle valve seal. After several thorough cleanings, the glass can be used.

This product seemed good to me and I have used a similar aluminum product before. It was expensive but definitely solid. I don't remember the exact combination I put in there - some sort of diluted cleaner (purple starch or plain green). I went to use it and sprayed a mist of rust all over the object I was trying to clean. I try to use as little plastic as possible, but in this case a durable and reusable plastic version would have prevented the problem. Because of the weight I can probably use

I bought this device to spray the stripper but I needed information about the tip. Some said it was regulated, others said it wasn't. When I bought it and tried it with water I found that it is not adjustable. Either it's fog, or if you get that little thing out of the top, it's a stream that'll rush through the whole park. What I did to fix the atomization situation when you need an adjustable atomizer is to buy a 3/8 by 1/8 sleeve. I then used the nozzle from a cheap hand pump sprayer and now

PURCHASED 2. One is still in the box and I'm not sure I'll be using it. I wanted one for the tire cutter and one for the tire shiner. I applied tire shine and it worked great. I put it aside for a week and tested again and all that came out was a rusty mess. It would be nice if the manufacturer said that the liquid cannot be stored, otherwise it is useless. I should also mention that pads suck. At least I knew I had to use teflon tape before putting pressure on it. I would not spend 60€ for two

They are much more economical than the smaller aluminum ones. The spray pattern is actually a mist and not adjustable. If you're expecting an adjustable nozzle, maybe someone will make one, but it's not. I fill it with Isopropyl Alcohol 995 for an insecticide safe for kitchen surfaces to keep them from freezing. Except that flies can bathe in this material. Use a soapy water sprayer to knock them off. The reason you need this is because alcohol over 50% disables the atomizer - it slides right…

As many others say they are not perfect out of the box. I ordered two and after reading several reviews carefully inspected the plastic washers for cracks and leaks. Everything checked out fine. I squeezed them and checked for leaks. Couple of wrenches to tighten the nuts and now there's no more air leaking out. I thought I was clean. Filled PB blaster, pressed and button pressed. All I got was dribbling. After inspection I would say that the nozzles were clogged with metal seals. The company…