💡 Brilliantly White Engine Integrated Driver Floodlight: Powerful Illumination for All Your Needs Review

Dangerous if you don't know how to use 110 to keep it safe. So a little mechanical design for your heatsink and voltage is important. For this reason I buy 36 volt versions where children can be around, near water etc. Use heatsink grease and a fan if using it for a long time.

I was trying to use them to upgrade an old hidden wall panel. That does not work. Lasted 3 weeks all night every night. I used a 1/8" flat bar that was bolted to the aluminum body of the fixture. The flat bar peaked at 180f and the heat transfer to the mount was significant, but not enough in my opinion.

high quality LED modules. Not 4062 boards as pictured but good quality AC110V-6040. The modules have been tested at 120VAC and draw 55W so these are 50W modules as advertised. But they get very hot even on a medium sized heatsink at around 180F. Unless it's mounted on a very large aluminum heatsink, it also needs to be actively cooled.

These things are cheap and bright, just make sure they're plugged into a big enough heatsink. I made a court light with one. I modified another one to fit an old halogen work light. Now it uses 50 watts and generates almost no heat, instead of 500 watts and a face burner.

High quality led cob smart modules. Not 4062 boards as pictured but good quality AC110V-6040. The modules have been tested at 120VAC and draw 55W so these are 50W modules as advertised. But they get very hot even on a medium sized heatsink at around 180F. Unless it's mounted on a very large aluminum heatsink, it also needs to be actively cooled.