Header banner
Revain logoHome Page
wostore spring tubing benders kit for pipe o.d. 1/4, 5/16, 3/8, 1/2, and 5/8 inch 5 in 1 tube bender set logo

Wostore Spring Tubing Benders Kit For Pipe O.D. 1/4, 5/16, 3/8, 1/2, And 5/8 Inch 5 In 1 Tube Bender Set Review

8

·

Very good

·

$$
Revainrating 4 out of 5  
Rating 
4.1
🖊️ Marking Tools, 📏 Measuring & Layout Tools

View on AmazonView on ЯM

Media

(4)
img 1 attached to Wostore Spring Tubing Benders Kit For Pipe O.D. 1/4, 5/16, 3/8, 1/2, And 5/8 Inch 5 In 1 Tube Bender Set
img 2 attached to Wostore Spring Tubing Benders Kit For Pipe O.D. 1/4, 5/16, 3/8, 1/2, And 5/8 Inch 5 In 1 Tube Bender Set
img 3 attached to Wostore Spring Tubing Benders Kit For Pipe O.D. 1/4, 5/16, 3/8, 1/2, And 5/8 Inch 5 In 1 Tube Bender Set
img 4 attached to Wostore Spring Tubing Benders Kit For Pipe O.D. 1/4, 5/16, 3/8, 1/2, And 5/8 Inch 5 In 1 Tube Bender Set

Description of Wostore Spring Tubing Benders Kit For Pipe O.D. 1/4, 5/16, 3/8, 1/2, And 5/8 Inch 5 In 1 Tube Bender Set

【Desired Curves】Flexible steel spring tubing benders are designed for bending thin-wall tubing, copper and soft metals to the percise angle (up to 180 degrees) without crimping or collapsing the pipes. 【Suitable Size】Suitable for 1/4, 5/16, 3/8, 1/2, and 5/8 inch O.D.tubings.Most common use pipes sizes in the daily life. 【Durable Material】The kit adopts a durable oil hardened and tempered spring steel with a zinc-plated finish.Makes the spring solid and durable. 【Easy to Use】 Flared end makes sliding tubing in easier.Springs back to original shape after use.Simple operation and get what your want perfectly.Zinc plated help you clean it easily and not tend to rust no matter indoor or outdoor. 【General Recommends】For a better result,using one bender over the tube and an additional bender inside the tube.

Reviews

Global ratings 8
  • 5
    5
  • 4
    1
  • 3
    1
  • 2
    0
  • 1
    1

Type of review

Revainrating 3 out of 5

Defective bendy straws

I used these to bend custom brake lines. Was ok, would use in combination with pipe bending pliers tho to achieve more precise bends. Do not use as a straw, they suck.

Pros
  • good
Cons
  • Construction feels flimsy or cheaply made

Revainrating 5 out of 5

The worked as expected & good value

This tool did what I wanted it to do. Working with the 5/8” copper tubing it was what I needed for the job. Treat it right and it will get the job done.

Pros
  • Work Well
Cons
  • Not suitable for larger tubing sizes

Revainrating 5 out of 5

Just what I needed . . .

I bought a copper tube bender, but it would not work up close to the wall. I used these springs for bending 3/8" and 5/8" copper tubing and they worked very well. For the 5/8 size I made a clamp block to hold the tube in place and finish a bend, it was a synch that way. Love these!

Pros
  • works great
Cons
  • Not compatible with certain types of tubing materials

Revainrating 1 out of 5

it will let you kink you tubing

Over the years I have lost or loaned out my spring tube benders. I expected that when I purchased these they would be what the description said, wrong, I was unable to even make a 15 degree bend without kinking my tubing. Save your money buy American made, so far we still use inches

Pros
  • Does what it is supposed to do.
Cons
  • Limited durability; may break after repeated use

Revainrating 5 out of 5

Why is it so hard to find these any more. These work great.

Used to be these type of benders were easy to find but not anymore. They work great on soft copper especially on the smaller sizes.

Pros
  • Works as advertised, no issues.
Cons
  • Inaccurate markings make it hard to achieve precise bends

Revainrating 5 out of 5

This is a VERY nice set that covers many sizes:

I have used Spring Benders for a long time. They are great for 'soft' copper - like that used in Refrg and Gas lines. The harder the material, the less these will work. What you need to understand is that the strength of the spring allows you to bend the pipe without kinking it. The spring can NOT allow the pipe to deform (from round) and must fit closely around the pipe without loosing its own shape. This requires very strong wire. The instructions suggest putting one bender inside the pipe…

Pros
  • Prefect tool to use when bending and modeling small dia copper rubbing for HVAC
Cons
  • Requires significant physical effort to make bends

Revainrating 4 out of 5

A little shorter than i was anticipating but they work.

These are 2/3 the size of my JB Industries. I bought them because I misplaced my 5/8 on a jobsite. If i take my 5/8" JB and hold it horizontally by the straight END it is stiff as a board and does not droop. Holding this 5/8" China made product (keep in mide it 8" long compared to JB's 12") the same way, it droops. You get what you pay for. ;)

Pros
  • making custom transmission cooler line for after market radiator in a 66 chevy pickup
Cons
  • Only includes one size of each type of tube bender

Revainrating 5 out of 5

This bending tube kit is awesome! Works great !

I ordered this tube bender kit for bending 5/16 inch and 1/2 inch AC copper lines and it was delivered very quickly. This tool is very well made and easy to use if you do some research into it's correct usage, you won't have any problems. This tubing bender can bend pipes to the percise angle (up to 180 degrees) and made the bends flawlessly you desired. Worked great. The set came as described with multiple sizes, such as1/4inch,3/8inch,5/8inch, worthing every penny. This bender kit made the…

Pros
  • Does work
Cons
  • Received empty package it was sealed nice but no springs