🚗 Yueton 12pcs LED Rocker Toggle Switch On-Off Control for Cars and Trucks - Blue, Green, Yellow, Red Review

So I bought these years ago, I use them here and there for small projects. Input voltages (7-32V). I also have a laptop charger that I adapted to connect to this case. It turns out I've been running this switch on 20V for a year now and it's still working fine. I went back to check the input voltage and now I'm just plain impressed with this switch so I had to leave a review. Oh, it's worth noting that if you decrease the hole size and "press" the switch at all, it sticks.

Pros: The LED is bright enough to indicate but not crazy enough to blind you. When triggered, a very strong click can be heard. Cons: Improper connection of internal components for proper operation. All current is forced to flow through the LED if you use the two outer poles, making the switch resistance 5-9 megohms. If you connect both positive and ground as you are told, no current will flow through the accessory due to the voltage drop below the LED input voltage. To work properly, the LED…

I would give these switches 10 stars if I could. This has to be some of the best bangs for the dollar I've ever bought from Revain. I have used 4 switches for lights and turn signals on my electric bike and they are perfect. The little LEDs "flash" to remind me if the turn signal is on or off. I am sure that I will use the remaining 8 switches in various projects in the near future. What a deal at less than $1 per switch. Simply connect the brass tab to the ground wire, the middle tab to your…

For those concerned about the orientation of the light when it is on. The attachment is very simple and does not even damage the case. HOW TO CHANGE THE LIGHT TO ALIGNMENT: Assuming you have a tiny screwdriver/other small pry tool. Just lift the switch out of the case (it's barely held in place by two tiny plastic sticks in the middle). It pops out instantly, then simply rotate the top black light cover to your desired orientation and press the switch again. Just make sure the inner "swinging"…

These switches are really good! The LED indicators are very bright. We used a couple of them on our FIRST Robotics Competition robot. We had blue to toggle the bottom glow of the blue LED and red to toggle the bottom glow of the red LED on our robot. It worked great and they are still working even after the robot went through many obstacles and got knocked down by other robots. We built a small keyboard for them by drilling two holes the diameter of the switches and they fit securely with small

These buttons are good for the price but as other reviewers have pointed out the switches are upside down. Looking at the switch from the side, there is a copper colored contact (negative) on the top of the switch (see last photo). As you can see in the 1st and 2nd photos the switches come like this. The LED is down. Most people want the LED on top as that makes more sense. As you can see in Photo 3, just take a small screwdriver and stick it in the side and the cover will pop out with a little

Hey guys! This is a simple single pole double throw (SPST) switch. If you connect the brass-colored clip to ground, the LED will work. You don't have to connect it if you don't want to. As others have pointed out, the "on" switch position is behind the other switches. You would expect the light to be on when the LED is off, but that's not how this switch works. This can be clearly seen in the photos. Another reviewer explained how to change the switch, which I did. This takes some patience and…