🖨️ 3D Printer Parts & Accessories
3 Review
Super -fast printing nozzles for use with the Volcano block and packs. Great to print large layer heights and at extremely high flow rates. Selectable nozzle diameters: 0.40mm, 0.60mm, 0.80mm, 1.00mm, 1.20mm.
3 Review
Near-ender extruder, geat at printing TPU, compatible with a wider range of filaments. Better Extrusion: because the motor mounted to print head, it is easier to push filaments through the nozzle, result in better extrusion. Faster Retraction: because the extruder is near to nozzle, it can retract filament quickly. 4 wheels back plate suitable for heavy…
Read more about this product
3 Review
Compatible with most 3D printers, E3D, MK8 and Ultimaker, CR-10, Duplicator, RepRap, etc. The nozzles adopts premium brass, better thermal conductivity and higher hardness, excellent wear resistance, smooth internal contact surface of nozzles effectively help you prevent waste of excess filament. Super flexible needles support multiple times of bending…
Read more about this product
3 Review
【Parameter】Input diameter 1.75mm, out thread: M6. 【Premium Materials】The 3D printer nozzles are made of high quality brass material, sturdy and durable, brass can be used to print PLA, ABS and most any other non-abrasive materials. 【Characteristics】MK8 Nozzle through long-term testing to solve the problem of plugging and missing materials to the…
Read more about this product
3 Review
Super Durable Material: The extruder nozzle is made of hardened steel material, which has higher hardness and precision than ordinary brass extruder nozzles, better heat resistance, longer service life, and compatible with more consumables. High Precision: Hardened steel nozzle has higher toughness and hardness,not easy clog during printing, easy to…
Read more about this product
3 Review
Item Number: Volcano heater block silicone sleeve protective sleeve for E3D Volvano Print Part. Material: Made of High temperature resistance silicone material. Helps to keep the hotend temperature extremely stable. Can extend the life of the heater block and extruder by keeping it cleaner. High temperature resistance: 280°C.
3 Review
Kit includes: 1pc Universal Geared Extruder, 1pc Screws package, 1pc Installation tools package, 1pc Stepper motor mounting bracket. Upgraded High performance extruder for 3D Printer. Upgrade Highlights: 1. The position of the gear and the accuracy of all screw holes are calibrated. 2. Modified the new buckle, both sides of the V2.0 version of the DDB…
Read more about this product
3 Review
[Upgraded Mainboard v2.2.1] - Quieter, more powerful, with excellent stability during printing. Work with Creality Ender 5 plus, CR-10S, CR-10 S4, CR-10 S5, CR-X, CR-20, CR-20 PRO 3D printer. [Super Quiet Driver] - TMC2208 Stepper Motor Driver and the bootloader installed. Super Quiet and Noise Reduction. [Also Fits Other Models] - Firmware is…
Read more about this product
3 Review
Simple Assemble: No welding, No modification, No need other tools, Easy to install. High Quality: with All-aluminum coupling and 42-34 stepper motor, Double Z structure runs smoothly. Mature Solution: The dual z axis upgrade kit is compatible with Ender 3/ Ender 3 Pro/ Ender 3 V2/ 3D printer.Easily improve 3D printers with low cost efficiency to Dual Z…
Read more about this product
3 Review
【Material】 Material: aluminum alloy; Surface Treatment: anodizing. 【Widely Used】widely used for Creality Ender3 Pro/Ender3 V2/CR-20 Pro etc. 【Install】Already assembled,you don't need to assemble it by yourself. 【Function】you can adjust the belt freedom, more better than original. 【Package Include】1 Kit 2020 Profile X-axis Synchronous Belt ,1 Kit 4040…
Read more about this product
3 Review
High torque Low noise. Nema 17 stepper motor with step angle 1.8deg. Holding Torque: 45Ncm(63.74oz.in), Voltage: 12-24VDC. Rated Current/phase: 1.50A & Phase Resistance: 2.3ohms. Build with 1 Meter Pin Connector.
3 Review
100% SATISFACTION GUARANTEE: Refund your money in 30 days.Any accessory appears to be unable to work, please contact us and get free replacement. High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high…
Read more about this product
3 Review
【Constant Temperature】: Keep a constant temperature printing environment,allowing for much more stable temperatures once the printer is operating.This 3d printer enclosure can lead to better results with high temperature filaments and helps with bed adhesion at high temperatures as well, improve printing stability. 【Simple Installation and Stable…
Read more about this product
3 Review
❤【32 Bit High Performance Microprocessor】TFT35 E3 V3.0 touch screen uses 32 bit ARM level Cortex-M3 series STM32F207VCT6 ,120MHz frequency Microprocessor, it is designed for ENDER 3 3D printer especially,which can perfectly replace the original LCD screen of Ender3 Printer. ❤【Two Working Modes】TFT35 E3 V3.0 Touch screen support UART serial port screen…
Read more about this product
3 Review
ender 3 heater cartridge material : Stainless steel (304). 24V heater cartridge voltage and power : 24V/40W. Application of the 24v heater cartridge 40W: Creality ender 3, ender 3 Pro, ender 6 CR-10S Pro etc. 3D Printers Prusa Mendel. Diameter of the ender 3 pro heater cartridge : 6mm. Length: 20mm,Wire Length:1M. Temperature of the ender 3 V2 heater…
Read more about this product
3 Review
Fits: FlashForge Creator Pro / FlashForge Creator X / FlashForge Dreamer / QIDI TECH I / PowerSpec 3D Pro / PowerSpec 3D X / PowerSpec Ultra 3D Printer / Wanhao Duplicator 4S / Wanhao Duplicator 4X / Wanhao i3 / Monoprice Maker Select 3D Printer v2 / Cocoon Create 3D. Kit Includes: 1 Plated Brass Wear Resistant Nozzle / 1 Thermal tube / 1 Thermal…
Read more about this product
3 Review
WORKS ON NYLON FILAMENTS: specifically built for nylon filaments unlike many other products. WORKS ON MULTIPLE SURFACES: works on glass, PEI, Buildtak, and Kapton. EASY USE: applying Magigoo PA is as easy as child's play. Shake, press, apply to an active printing area. Magigoo welds to the 3d build plate bed seamlessly and stops prints from warping…
Read more about this product
3 Review
The nozzle size is marked with number. Nozzle size: 0.4mm for 1.75mm filament use. For Volcano Heat Block and other all 3D printers which uses Volcano hotend. Pack: 1piece. Material: hardened tool steel.
3 Review
High Lubricity Additives make our XS Series tubing the lowest friction Bowden tubing on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. Capricorn bowden tubing is designed…
Read more about this product
3 Review
★Material:3D Printer belt tensioner made of high quality cold rolled sheet material, Surface oxidation treatment,durable, fine workmanship. ★Install:Already assembled,you don't need to assemble it by yourself,No need to change the original belt length,direct installation and ready to use. ★Function:you can adjust the belt freedom, more better than…
Read more about this product