Review on 🚽 Korky BeehiveMAX Universal Plunger with Telescoping T-Shaped Handle, Black - 96-4AM by Sam Simone

Very disappointed. I bought this flask based on the great reviews it received but I have to say I am extremely disappointed with its quality, finish and performance. Unlike other flasks I've had, the walls of this flask are too thin and brittle to hold their shape. when using a plunger. Instead, the walls of the plunger attachment "collapse" and will not return to their original position until you bang the attachment against the inside walls of the toilet. before you can push the plunger again. The thin and weak bell walls also mean the piston can't generate as much force as the thicker, stronger walls I've used. I've had the above issues before, but usually with flimsy plastic pistons. Additional Comments - July 9, 2018 ___________________________ I would like to thank the people who also took the time to comment on my review of this product. In response to these reviews I made sure to fill this bell with water as much as possible and while this helps somewhat to reduce the inside of the bell it does not completely eliminate the problem. The bell can still invert. Also, the bell is about 8 inches tall, and unless the toilet is filled to the brim with water, you will have trouble filling the bell with enough water to make it roll-over proof. from the inside to the outside. Also, sometimes the toilet doesn't fill up with much water when it's clogged, either because some of the water drains away on its own, or because pre-dipping with this device lowered the water level but didn't completely clear the toilet. Blocking. Sometimes you need to use a plunger when there is almost no water in the toilet, and the plunger easily breaks in this situation. I've had other plungers in the past that were much more heavily constructed and had much thicker and stronger walls so when there was little or no water in the toilet I could dive hard and repeatedly to clear the blockage without the bell ringing collapsed turning inside out. on the toilet with almost no water to clear the constipation. I can't get the same results with this Corky flask. .Also, this plunger doesn't work well with my Toto toilet which has a slotted hole at the bottom. The cap does not completely cover the elongated outlet and thus does not provide a tight and reliable seal at the inlet. Also, when you remove the plunger from the toilet outlet, a lot of water (and dirt) remains in the faucet. That means you have to wait about 5 seconds for the water and debris (which can be repulsive) to drain out of the cap before you can pull the plunger out of the toilet, or you risk soiling your bathroom floor. . Sometimes, after draining the contents remaining in the funnel into the toilet, you need to flush the toilet again to empty it, refill it with clean water and "dip” the funnel in toilet water several times to clean it.