Review on 🖥️ Enhance Your Graphics Efficiency with Graphics Express Y Splitter Extension by TeamProfitcom Industrial Electrical by Marc Gallner

I am a cryptocurrency miner. Bought these for me and a friend. My friend plugged them in against my advice to power an RTX 3070. He was using the wrong settings, my 3070s run at around 120-140 watts with a mining load. Well my friend wasn't listening and put 230 watts through these cables! Not only did his house NOT burn down, but everything worked fine under this load for about 1 week until I caught him and adjusted his power settings. Previously, when I corrected the overclock settings, I physically felt the cable. At 230 watts, the cables were lukewarm but not hot and were in good condition under this load. I highly recommend these cables as they have run higher and higher than the safe and recommended specs. These cables will work to power an RTX 3070 and below with the correct reduced voltage, but for maximum safety use 8-pin splitters for RTX 3060 and above unless you really know what you're doing. hot over 230W. ***FIRE SAFETY NOTICE*** These 6 pin cables are rated for a maximum output of 216W only. And under sustained load, you should only be at 80 percent of that. If you need more power, buy 8-pin splitters from the same company. Anything over 200 W continuous load is a fire hazard. you have been warned Unless you really know what you're doing, use 8-pin splitters for RTX 3060 and above. EDIT: I understand that other reviewers turn these splitters off because they run over 230 watts. ***FIRE SAFETY NOTICE*** These 6 pin cables are rated for a maximum power of 216W only. And under sustained load, you should only be at 80 percent of that. If you need more power, buy 8-pin splitters from the same company. Anything over 200 W continuous load is a fire hazard. you have been warned Unless you really know what you're doing, use 8-pin splitters for RTX 3060 and above. EDIT: I see other reviewers knocking these splitters off for running over 230w. ***FIRE SAFETY NOTICE*** These 6 pin cables are rated for a maximum power of 216W only. And under sustained load, you should only be at 80 percent of that. If you need more power, buy 8-pin splitters from the same company. Anything over 200 W continuous load is a fire hazard. you have been warned If you need more power, buy 8-pin splitters from the same company. Anything over 200 W continuous load is a fire hazard. you have been warned If you need more power, buy 8-pin splitters from the same company. Anything over 200 W continuous load is a fire hazard. you have been warned Buy 8-pin splitters from the same company. Anything over 200 W continuous load is a fire hazard. you have been warned If you need more power, buy 8-pin splitters from the same company. Anything over 200 W continuous load is a fire hazard. you have been warned Buy 8-pin splitters from the same company. Anything over 200 W continuous load is a fire hazard. you have been warned If you need more power, buy 8-pin splitters from the same company. Anything over 200 W continuous load is a fire hazard. you have been warned