🖨️ Biqu Printer Flexible Magnetic Sheet - 140x84mm Review

First Grade. Please use the Whamtam installation video as there are NO instructions. Your printer wasn't originally designed to use them so you need to be careful, especially if this is your first time setting up a printer with a cymbal, make sure you line up the flex plate with your build plate and watch as you do Lower your build plate. Washing only fits the back of the printer, but yours may be different. If you have adhesion issues like me, check the level first. If that doesn't work, use…

Love how pretty it is! The magnet is very strong and if the magnet and plate have been cleaned with some isopropyl alcohol and left to test, they are solid and will not move until pulled off. The glue holding the magnet to the plate isn't the best, but I've had 3M weatherproof glue that stuck perfectly. I think even with the best magnets for these buildplates this is an issue so that's to be expected. The only thing you need to do is make sure you have something to change the z limit height…

See photos. The magnet is not strong enough to hold the flexplate in place while printing. , 2021. 10 prints before writing this review. 3M tape: Good. Adhesion of the flexible plate to the print: not impressive. (I had to roughen the surface.) Flexible Plate Removes Pressure: Good. Attraction of the flexible plate to the magnet: Poor. The magnet cannot handle a model with a large base or many supports. Anything that covers more than 50% of the total FEP sheet area. The magnet does not hold…