🔌 Haisstronica Water-resistant Connectors with Heat Resistance - Self Locking Aircraft Connectors Review

do not need to be crimped. An Olbic will work, but I'll use a butane gas lamp for the tool kit. I tried what they show on TV and they are really hard to take apart and they are waterproof. . Buy these if you are doing vehicle wiring.

These splices are easy to use and offer both a strong bond and a one-step heat shrink. I usually forget to tighten the shrink tubing when soldering the connection and inevitably have to redo the connection. This product fixes this (too common) error.

I would definitely buy them again, they give you a lot and are very easy to use, a regular lighter will reduce them, and so far It good thing i have a rig with a bunch of blue lights and usually mess up items or them every year seems like a good connection so far and love how easy they are to use.

These connectors are simply the best! Insert the end of the wire into the center. Use some heat on the outer edge. Holding the wire in place, do the same with the other wire on the opposite end. Then use heat to melt the solder and apply more heat to the ends. 100% soldered, shrink wrapped and weather sealed. It's that easy!

A few electrical connections broke recently when my boat trailer hit a big pothole and my trailer bounced. This solder o grommet kit worked quickly and exactly as advertised. I was able to quickly repair my boat without soldering. I'm not giving it 5 stars because it was impossible to see if the solder actually melted, but the boat runs such a solid 4!

My girlfriend is a real electrician. When I told her about this product, she didn't think soldering wires could be that easy. I wish there were instructions included. At first I didn't know how to work with this, but I quickly realized that you need to use a lighter. It works incredibly well, the shrink wrap has amazing heat resistance while perfectly retaining its round shape. solder heating.

Anytime you solder or braze, the base metal must be polished clean and the solder free of oxidation. The idea of having heat shrink tubing and solder in the same body is good in theory, but the solder inside the tubing will oxidize and will not flow without flux paste. I tried with and without the flux paste, then opened the tube to check adhesion and it wasn't even close to good adhesion. It dissolved.

I checked them carefully before buying. Some people have seemed to have issues with overheating and melting of the outer seals, but as long as you keep the heat moving and twist it a bit during the process, it works great! I've used at least 2 dozen of these and haven't had any problems with melting or soldering. Definitely need a high temperature heat gun to melt the solder in it so do yourself a favor and make sure you have that heat gun and don't try to use a lighter or anything like that…