Saw Makita JR3070CT Review

The third reciprocating saw, we cut the gas block, the first two are inexpensive in the region of 4-7 thousand, they worked less than 1 day, there was not enough power. Neither reliability. This one is powerful enough as long as it works.

Sharing my opinion with you.It is difficult to find files for dismantling mixed structures, but this is not a problem with saws.

It was purchased for cutting metal pipes of old heating. Did the job just fine! Along the way, when replacing heating, sawed metal and wood and plastic. The device is awesome!

-Do not forget to clean the lock and its niche from debris and moisture, otherwise adhering rusty masses will form there. I perform this procedure with WD-40 and an old toothbrush. They also write that if the rod is recessed into the body and you need to remove the canvas, then you have to "catch" the moment by pressing and releasing the power button. So I don’t play this “game”, because my finger calmly gets into the recessed part of the casing and just as calmly turns the lock to the “open”…

Some pros: Sawing amazingly, good damper, no recoil. Sawing sheet metal 3 mm. Has some cons It would be nice if there was a backlight with a "target designator". It takes skill to cut straight.

In addition to the suitcase and the stubborn shoe, everything is super and the saw and the delivery and the store, there are no smells of rubber or plastic, as many people who bought finishing from crooks write

A button with a lock on the end of the beading tool - I just didn't guess right away, so I'll point it out. Has pros: A very powerful saw, judging by the weight, it is soundly made, a long, thick, flexible wire, as it should be with a makita. Many complain that the wire does not fit in the case, but this is a matter of habit - it is neatly folded and everything is closed, and if you just shove it into the case, then there will be problems. Has cons: Price, especially now. I bought for a…

I bought it to replace the craft from the PIT company. Of course, it's just another tool, another level. I sawed a frozen gas block on which the last saw burned out, just a fairy tale why I didn’t have it before. I dismantled the old heating system from a pipe with a diameter of 57, a wall of 8 mm without sparks in a wooden house, the only concern is the canvas, if you pile it up with all the dope, then the canvas burns instantly. H. Z. how to do such a job. Wood with a good canvas gnaws almost

The tool was bought for work in a large overgrown garden, almost a forest. I have been using it for 4 years in cases where it is inconvenient to use a chain saw: for forming crowns, pruning, cutting out of the ground the knotted roots of perennial bushes, etc. The result is excellent, there is plenty of power, AVT does a great job - no return. The pendulum action provides a real fast cut; without it, buying a saw for woodworking is money down the drain. I cut 50mm boards into bars, it does an…

I bought for cutting pipes in the garage, and firewood, I did everything now. Has some pros First of all, I was pleased with the price, well, I like this company. Some cons: Of the shortcomings, I probably did not expect that it would be heavy.

Its pros: A good tool, I can feel the difference after working on cheaper saws of the same brand. Got cons: There are only 3 nozzles in the kit, and those are very short, and additional ones do not fit into the case in any way.

Great versatile tool. Suitable for dismantling everything and everything, and for creation. Accuracy depends only on the hands, but you need to understand that a reciprocating saw is not a miter saw. I sawed a lot of aerated concrete, a lot of boards with and without nails. He sawed down trees, cut blanks for construction. Buy files native or other good manufacturers and you will be happy

Bought for 15,700 08/12/2022 Assembly China. For cutting foam blocks (dismantling partitions, replacing radiators, interior doors, cutting reinforcement when passing through a wall (cross) Saws without sparks, cuts everything, quickly and confidently! The most important thing is to buy reciprocating blades for each job and choose the mode of operation (speed) I bought a canvas for aerated concrete (1900 r), but it is only suitable mainly for Dismantling, if a more accurate cut is needed…

Its pros: The saw is just a beast, constant electronics work, the pendulum move turned out to be very useful for cutting down trees. Met all expectations. Satisfied with everything 100% Its cons: Chemical smell from the rubber casing when unpacking, but the operating time is not felt. I think it will fade.

Like many users, I am satisfied with the purchase of this particular saw and its competitors have no equal in price, quality and performance in a single model. I use it for dismantling and where you need several different tools to perform and where this saw replaces them. Of course, I recommend this one to anyone who decides to get a reciprocating saw and does not know which one to choose. The last argument is that spare parts are not difficult to find and they are cheaper than others.

With dusty work, it is advisable to insert the knife once and that's it. Try not to remove the knife after work once again, the cartridge will last longer. Tried to clean sense 0. Has some pros To work with a gas block, you can safely take it. I've been working at the facility for half a year, I have never let me down. The knife is still whole, it is better to take with fine teeth. I saw mostly at 5 speeds, 1 mode on the rest is very shaky. Haven't tried metal. JR3050 t do not take it, it is…

Pila liked it. Yes, I liked it there, I'm wildly delighted ! Guys, this is the tool! I am not a professional worker or installer/dismantler. I took it just for myself, for the house. I met on the Internet the opinion that reciprocating saws are the most suitable tool for dismantling everything and everything, for destruction. And somehow calmly passed by, I didn’t need such a tool, because. I also have other tools: chain saws, grinders and a jigsaw. What else does? But then I suddenly saw this…

Bought for use in a private home. Makita JR 3070 CT is a tool for many sawing applications. Saws the way you direct (this is about "curvature"). They write that this is a tool mainly for destruction, but for me it is one of the most sought-after tools for making something. I saw different materials: wood, plastic, aluminum, iron (just pick up files). She is a pleasure to work with. If possible, then buy - you will not regret it (it has everything that should be in reciprocating saws).

Before buying Makita, I used the Interskol NP-120/1010E saw. In principle, the drink is not bad. But when I started working with Makita, this is where I felt the difference. This is, of course, a vibration dampening system (hands quickly numb on the interskol). Quick and easy blade replacement. Ergonomics at the highest level. Switchable pendulum stroke (always on on the interskol). I have read some of the reviews on this saw. Someone's stop burst, and someone broke the saw blades. A popular…