Black Plastic & Vinyl Trim Restorer - Car and Truck Polish Solution - 12 oz Review

That worked but somehow the applicator I used with the used microfiber cloth was sitting on a box in my garage. Woke up with a horrible smell in the house, examined it and the applicator and towel were hot and actually burning the box. Thank goodness it didn't burn. wtf

Detailing is my hobby and after a long weekend in the outback in 2011 I used the product after all the great reviews. It took 3 coats for a deadpan result. Washed off 2 weeks after showering. The color of the vial I received does not match what is advertised or claimed by other buyers. This is the second product I have received from Revain as a likely counterfeit. I wouldn't be shocked if its contents were sent for analysis: vegetable oil and black dye. Seller please contact me for a…

• Be sure to use thick latex gloves or 2 pairs of cheap ones or you will get gray fingers. • Buy a bigger bottle as it works much better! • Buy 3 or 4 foam brushes for multiple vehicles • Clean all black plastic surfaces with a strong grease/oil/wax/silicone remover such as Plain Green, Vindex etc (I prefer acetone). This is a dye and cannot be absorbed into the plastic if preservatives are left on it. If you don't 'remove' the plastic you're wasting your time and money - don't blame the…

This thing exceeded my expectations. Now I've just finished applying it and I'm not sure how long it will last before a second coat is needed. It seems to have been going on for quite a while. The plastic trim on my truck looks brand new. I'm amazed at how good it is. OK details. Apply on a cool or warm day. Avoid doing this in direct sunlight because if you have streaks or heavy stains, they won't rub off easily after drying. Apply to the entire fairing area, e.g. B. the bumper cover, then use

I am a professional parts painter and this is the only paint/plastic restoration product I use. There is no other product that will give you as good results as the LAST. There are many products that improve the look until it rains. This is the only product that I can confidently put on my clients' cars and that I know will serve them well for a very long time. I always have a bottle in stock. I typically see a product lifespan of 2-5 years depending on usage and the conditions the car is in…

I like this product so far. I had a 2008 Chevy Avalanche I was looking to sell and wanted to improve the look of the black plastic that had faded over the years. I bought one of the other popular plastic products but after reading many reviews I was afraid to use it. I bought Solution Finish because of the good reviews and I am very satisfied. It's very easy to use. Clean the surface with alcohol, wipe and dry. It made an instant difference and looked amazing. Once dry you can rub your hand…

Update: April 8, 2020 It has been seven months since I applied this solution to my finish. It hasn't changed at all, it's a bit dirty now, but it's my own work. This is a durable finish for your car. (I've since added a sun visor to the hood.) September 14, 2019 I was expecting it to be a little darker, more black, less grey. I've applied it to at least four different plastics and machined them all. The only downside was that one plastic was darker than the other (see picture), luckily this…

Works well, but you have to prepare and try. Some people seem to have a lot of problems with this product. Based on my limited experience I suggest the following: 1. Make sure the surface is clean. Really clean. Extra clean.2. Use alcohol to prepare the surface. If you lose color when drinking alcohol, I doubt that substance will stick. 3. Let it dry. I suspect it will take a full day of warm weather to fully dry. I've never seen this run due to rain or washing, but probably would if it didn't…