🔧 20 Stainless Steel Worm Gear Clamps for Brewing, Plumbing, Automotive, and Mechanical Applications - Ideal for Beer Line Clamps, 0.39 - 0.63 Inch Size Review

Some non-stainless steel parts, so be careful. I tried using these clips with a cascade lid and it completely ruined my beer. The metal oxidized giving it a metallic taste.

Insanely cheaply made. The clasps are claimed to be stainless steel and the outer band may be, the screw that tightens and loosens the clasps is badly rusted and clearly not stainless steel as advertised. Don't buy them

Waste of money. The hose cannot be tightened properly to seal the hose over the hose barbs. Some clamps "broke" when tightened, and the orange tension knob broke in some cases.

They look pretty cheap and don't tighten as tight as necessary. They didn't pinch my hose even though the description said they would fit. Mostly because the threads don't go around the clamp far enough to tighten it. I ended up just going to a big store and buying better clamps.

Fits snugly on my 5/16 gas hose but does not tighten enough to fit my smaller fluid hoses. The swivel function is very convenient, so I don't have to pull out a screwdriver every time I want to change the hose. I wish they were tight enough to fit my liquid lines as well, but I can just use the original smaller clamps for this and leave them for the gas lines.

Looks good at first glance then trying to use these clamps had to use pliers to close them without tightening anything. Poorly made, looks sloppy. Closing the yoke actually cut the metal of the belt from the worm drive. After closing it with pliers, the band deformed so I had to reshape the band into a circle to fit the 1/2" silicone tubing. That's literally the definition of useless junk.

These are very cheap clamps that are very difficult to tighten. I bought them with a wing, thinking it would be quicker and easier than using a screwdriver, but I was wrong. After the first clamp I regretted the purchase and by the fifth I almost sent it back but I would have to cancel everything I had already done. I wouldn't recommend it to anyone and will never buy it again.

Fits snugly on my 5/16 gas hose but not tight enough to fit my smaller liquid hoses. The swivel function is very convenient, so I don't have to pull out a screwdriver every time I want to change the hose. I wish they were tight enough to fit my liquid lines as well, but I can just use the original smaller clamps for this and leave them for the gas lines.

They look good at first, then try them Using clips I had to use pliers to close them without holding anything together. badly made, looks sloppy. Closing the yoke actually cut the metal of the belt from the worm drive. After closing it with pliers, the band deformed so I had to reshape the band into a circle to fit the 1/2" silicone tubing. That's literally the definition of useless junk.

These are very cheap clamps, very difficult to tighten. I bought them with a wing, thinking it would be quicker and easier than using a screwdriver, but I was wrong. After the first clamp I regretted the purchase and by the fifth I almost sent it back but I would have to cancel everything I had already done. I wouldn't recommend it to anyone and will never buy it again.