🖨️ 3D Printing Supplies
2 Review
1KG net (apximately 2.2 lbs) Filament with Clear Spool. eSUN ABS 3D Printer Filament Vacuumed Sealed With Desiccant. 3mm Filament Diameter (Dimensional Accuracy +/- 0.05mm). Recommended Extrusion/Nozzle Temperature 220C - 260C. Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 2.05" - Inner Circle Diameter: 3.5".
2 Review
This filament has strong toughness and not easy to break. PLA PLUS is more resilient and smooth than PLA whether you are a novice have a pleasant printing experience. Feed smootyly and constantly without colgging the nozze or extruder. 1.75mm Filament Diameter (Tolerance: ± 0.05mm), recommended print temperature: 392-446°F(200-230°C), Spool Diameter…
Read more about this product
2 Review
Extreme high flex MODULUS (6.2 gpa) / twice as stiff as PLA with moderate strain at break (8-10 percent ). High glass temp (TG = 80°c) and very high melt strength and viscosity. Low odor / styrene free solution. Colorfabb_xt is produced with Amphora 3D Polymer from Eastman chemical.
2 Review
Extreme high flex MODULUS (6.2 gpa) / twice as stiff as PLA with moderate strain at break (8-10 percent ). High glass temp (TG = 80°c) and very high melt strength and viscosity. Low odor / styrene free solution. Colorfabb_xt is produced with Amphora 3D Polymer from Eastman chemical.
2 Review
PLA (polylactide) is a biodegradable and biocompatible 3D plastic derived from plant-based raw materials. Unlike ABS, it does not require special conditions, there is no need for a heated table or a thermal stabilization chamber. Large objects printed from PLA practically do not deform or crack. Great for printing large-sized products, as well as parts…
Read more about this product
2 Review
NEW MATERIAL FORMULATION tested for improved print quality, reliability and longer filament shelf life. DREMEL DIGILAB PLA FILAMENT is plant-based. RFID ENABLED material detection and quantity tracking with Dremel DigiLab 3D45 3D printer. PINK: 1.75mm PLA Filament. COMPATABILITY with all Dremel DigiLab 3D printers and other manufacturers. Prints at…
Read more about this product
2 Review
Behaves as a combination of ABS and PLA. Good tenacity, excellent hardness, high impact strength as much as 30 times more than PLA. Excellent breaking elongation. Corrosion resistance and weather resistance including UV. Excellent shock resistance between layers and stress resistance - Does not yield “creamy white spot” due to stress for objects with…
Read more about this product
2 Review
STRONG AND DURABLE 3D PRINTS - ABS is one of the plastic filament materials most commonly used for 3D printing. It produces durable 3D printed models that have higher resistance to heat and are less brittle than those printed with some other popular 3D printing materials (like PLA). HIGH QUALITY ABS FILAMENT - Octave engineered its ABS filament to work…
Read more about this product
2 Review
PLA Plastic (Polylactic Acid) - a eco-friendly polymer which is harder than ABS, and melts at a lower temperature. Amount: 2.5kg (5.5lbs) of Filament Per Spool. Filament Diameter: 1.75mm (Dimensional Accuracy +/- 0.05mm). Recommended Nozzle Temperature: 190 - 240C - Depending on type of 3D printer, printing speed, and ambient conditions. Compatibility…
Read more about this product
2 Review
★Features: Excellent sealing, can be used repeatedly,moisture-proof,durable. ★Usage instructions: Align the manual air pump at the air valve port of the sealed bag, and the air can be easily pumped out. ★Tips: After exhausting, remember to press by hand to make the exhaust port flat and better sealing effect. ★Package Content: 5PCS 3D Printer filament…
Read more about this product
2 Review
The best and most consistent ABS filament for your MakerBot Replicator 2X Experimental 3D Printer. Every filament color undergoes long duration testing to ensure that there are no deviances in print quality. Every millimeter of MakerBot filament has been subjected to stringent laser testing. Consistently round diameter ensures highest print quality and…
Read more about this product
2 Review
1.75 mm diameter, 1 kg net weight. Filament Roundness: +/- 0.07mm. Filament Diameter: +/- 0.05mm. Print Temperature: 220 - 225°C. Heated Platform Not Required.
2 Review
0.95Kg 2.85mm TPE(Thermoplastic polyurethanes)3D printer filament. Recommended Extrusion/Nozzle Temp: 200°C - 220°C (392°F~ 428°F),Heated Bed Temp: 60°C - 80°C (140°F~ 176°F). Design and manufactured in compliance with the requirements of EU REACH, RoHS. Eco-friendly, non-toxic, harmless. HIGH PERFORMANCE: Low-Odor, Low-Warp, good tensile strength and…
Read more about this product
2 Review
* High Quality 3D Printer Filament— Lab tested thermoplastic resins ensure a contaminant free filament to provide maximum consistency for each 3D Print and extrusion. * Tight “Hassle Free” Winds — Not satisfied with the wind quality of SunLu or Overture 3D Printing Filament? Filament Hub PLA, ABS and PETG 3D Printer Filaments are wound tightly to limit…
Read more about this product
2 Review
✅ 1 KG (approximately 2.20 lbs) Spool, Designed to Fit The Most Common 3D Printers. ✅ 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm). ✅ Biodegradable and Environmental Friendly PLA, Known for Its Lower Melting Temperature and Ease of Use (No Heated Bed Required), Low-Warp, Odorless, and Offers a Glossy-Type Finish. ✅ High Strength Modulus…
Read more about this product
2 Review
More consistent flow with less tendency towards clogging compared to Everyday PLA. Less moisture uptake compared to HTPLA V2 allowing higher temperature printing (up to 250C or more) for further improved layer adhesion and part strength!. As little as 0. 5% shrinkage in x/Y and negligible change in Z during heat treating of 100% infill parts. Package…
Read more about this product
2 Review
LOW SHRINKAGE, HIGH PRECISION - VidaRosa Photopolymer Resin is especially designed for reducing volume shrinkage during the Photocuring process ,which ensures the high precision of the print model with smooth finish. FAST CURING, GOOD STABILITY - VidaRosa 405nm Rapid Resin is designed to significantly reduce printing time with its excellent fluidity…
Read more about this product
2 Review
High degree of wear resistance. 30 years of experience in developing high performance plastics. 50 times more abrasion-resistant than standard 3D printing materials. tested in our laboratory.
2 Review
100% PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant. 1 KG (approximately 2. 20 lbs) Spool. 1. 75mm Filament Diameter (Dimensional Accuracy +/- 0. 01mm). Recommended Extrusion/Nozzle Temperature 180°C - 220°C (356°F - 428°F). Spool Diameter: 7. 88" - Spool Width: 2. 69" - Spool Hub Hole Diameter: 2. 20".