π§ Automotive Tools & Equipment
1 Review
Forged from the finest chrome molybdenum alloy steel-the best choice for strength and durability. Radius corner design - to extend the life of fasteners. The design drives the side of the fastener instead of the corner. 1/4-Inch drive. 11mm deep impact socket.
1 Review
Size 55mm, Length 84mm. Manufactured of chrome molybdenum according to GGG-W-6608 to guarantee the highest standard. All sockets are marked with the size for quick identification - Lifetime Warranty. For use on pneumatic tools-Exceeds ANSI standards-Chamfered opening quickly aligns fastener to socket. High-torque, 6-point opening grips flat sides ofβ¦
Read more about this product
1 Review
γSizeγ1/2-inch drive socket, T30 torx bit, 3-inch (78mm) total length. γTorque StrengthγChrome molybdenum steel provides excellent durability and strength with every impact movement; black phosphate finish for extra protection against rust and corrosion. γChamfered DesignγChamfered ends insert smoothly into fastener head, reducing wear. γPinβ¦
Read more about this product
1 Review
IMPACT SOCKET - 19mm 6-point Impact Socket. SPECIFICATIONS - 3/8 Inch Drive Size with an overall length of 63mm (or 2.48 Inches). DURABLE MATERIALS - Made from Chrome Moly Steel for high strength and durability while having anti-corrosive properties. TOOL ORGANIZATION - Sizes are stamped for permanent and easy identification of size. SUPERIOR DESIGNβ¦
Read more about this product
1 Review
PSI RANGE - Reads from 10 to 50 psi. MAXIMIZE TIRE AND CAR PERFORAMNCE - Maintaining the proper tire pressure will maximize the performance and life of tires. It also improves vehicle handling and helps prevent blowouts. GAUGE VERSATILITY - Calibrated in psi and kPa. GAUGE DESIGN - Pencil-style with a 4-sided bar. MAXIMIZE GAS MILEAGE - Properlyβ¦
Read more about this product
1 Review
Direct Torque Technology helps prevent rounding of fasteners. Knurled Control Ring for added grip when handling the socket. Chamfered open end for easier engagement of fasteners. Hard Stamped markings to prevent loss of identification over time. Full Polish Chrome Vanadium finish helps prevent chipping and flaking under toughest environments.
1 Review
π5Yrs Warrantyγ2022 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V VehiclesγDesign for Passenger&Commercial Vehicles 2in1:The 1st ALL-IN-ONE scanner from LAUNCH ,work for Cars/Trucks/buses/trailers/excavators/diesel engine/construction machinery/ /pick-up/etc.γAutoAuth for FCA SGWγSupport Chrysler,Dodge,Jeep,Alfa Romeo and Fiat afterβ¦
Read more about this product
1 Review
[3 Socket Size] - (11mm, 13mm, 15mm) 3 different sizes in one spanner, fit for compact working environments. [CR-V Steel] - Made of heat-treated chrome vanadium steel to improve strength and durability, with polished and chrome plated finish to prevent rust and corrosion. [Y Handle Design] - Classic welded design allows both hands to use the lever toβ¦
Read more about this product
1 Review
FLEX HEAD RATCHET WITH RUBBER HANDLE - 1/2" Dr. 72-tooth Reversible flex-head ratchet W/ comfort grip handle 670Mml. SPECIFICATIONS - 1/2 Inch Drive Size with an overall length of 650mm (or 25.59 Inches). DURABLE MATERIALS - Made from Chromium-vanadium Steel Alloy for high strength and durability while having anti-corrosive properties. 180 DEGREES OFβ¦
Read more about this product
1 Review
Forged from the finest chrome molybdenum alloy steel β the best choice for strength and durability. Radius corner design - to extend the life of fasteners. The design drives the side of the fastener instead of the corner. 3/4-Inch drive. 30mm, 12 point thin wall impact socket.
1 Review
SUPERTORQUE lobular openings for greater turning power without deforming the fastener. Designed for maximum engagement on 6 point fasteners. Suitable for use with pneumatic and electric impact wrenches. Specially heat treated for impact use to provide long life, safety, and durability.
1 Review
CR-MO alloy steel for long life. Lifetime warranty. 3/8-Inch drive. 5/8-Inch hex driver impact socket. Provides increased strength, but also avoids rounding of rusted or damaged fasteners.
1 Review
COMPATIBILITY: Used to secure 1/2 inch sockets, with similar style 1/2 inch drive. Fit for sockets between 8-19mm (socket must be drilled all the way through i.e. 2 holes for pin to locate in). APPLICATION: Used for scaffolding, impact wrench, needle roller bearing, automobile sealing strip, radiator hose, rubber pad, etc. SIZE & PACKAGE: O-ring wireβ¦
Read more about this product
1 Review
Checks gear backlash. Compatible Drive Units: TR, TRS, MC-I, R-MR, Alpha One, Alpha One/Gen II and Bravo One and Two. Built with precision. Interchangeable with Mercury Marine 91-53459.
1 Review
Flat head screwdriver on one end + Valve core remover on the other. Comes pack of 10. Works with various applications. Comes with every Counteract Balancing Beads DIY Kit.
1 Review
Bit socket: Hex 4/5/6/8/10mm, Torx25/30/40 with an adaptor. 3/8" Dr. torque wrench. Made in Taiwan.
1 Review
Specially Designed Wrench Removes Ford High-Sheer Ratcheting Lock Nut on Popular F250/350 Series Trucks. Special Feature Includes a Centering Snout to Help Locate Special Axle Nut and Uniquely Designed Lugs for Maximum Strength. Use With 1/2" Drive Tool. Caution: Do not use with Power Tools.
1 Review
Switch Between Landscape and Portrait Modes. 1/4" and 3/8" Screw Thread. 50mm Mount on Base. This product supports both landscape and portrait recording and is compact, lightweight, flexible,quick and easy to use. It is designed to be used in a similar way to a camera plate and mounts directly to your 3/8" or 1/4" thread tripod/monopod head, or iFootageβ¦
Read more about this product
1 Review
SK PROFESSIONAL QUALITY: SK hand tools, including our sockets, are manufactured to rigid specifications. Quality control at every step of the production process ensures that each SK socket tool delivers exceptional performance and meets/exceeds global standards. SUREGRIP DESIGN: This set features SK's SureGrip hex drive design, which drives the side ofβ¦
Read more about this product