🔩 Bearings
1 Review
Size: (I.D. (Fw)= 8mm, O.D. (D)= 14mm, Width (C)= 12mm). ST14 steel drawn cup, GCr15 needle rollers one way clutch. Good heat tolerance, high load carrying capacity and stiffness. Low cross section, enable downsizing and suit for use in restricted mounting spaces. Pre-Lubricated. Good running properties.
1 Review
4mm in diameter; Package includes 100 piece ball. Precision grade G100 balls. Made of 316L stainless steel with higher corrosion resistance than the type of 316. smooth surface precision balls. Offer excellent resistance to sulphuric acid compounds.
1 Review
6mm in diameter. Helps prevent marring the coin surface. G0-G3 precision grade balls, Self-lubricating. Excellent strength, high toughness and wear resistance. Package includes 50 piece balls.
1 Review
[SIZE] - Inner Diameter = 8mm, Outer Diameter = 12mm, Width = 12mm. [MATERIAL] - Steel Drawn Cup, Steel Cage, Chrome Steel Needle Rollers. [FEATURES] - The outer ring of needle roller bearing is formed by precision stamping of thin steel plate, the structural space is small, and has a large load capacity. [CAPABILITY] - Torque: 3.15N*m, Rotating Shaft…
Read more about this product
1 Review
✔ 100% - Dimensional tolerance inspection for optimum assembly. ✔ Material - Manufactured by chrome steel sturdy and durable. ✔ Seal - Preserve grease and prevent impurities from entering. ✔ Guarantee - 6 Months free replacement or refund no reason. ✔ Expert - Professional bearing manufacturing began in 1945.
1 Review
4mm in diameter. Widely used in non-metal low load ball bearings. G0-G3 precision grade balls, Self-lubricating. Good mechanical characteristics and corrosion, collisions resistance. Package includes 200 piece balls.
1 Review
Drawn cup needle roller bearing for applications with high dynamic loads. Drawn steel outer shell (cup) has a reduced cross-section for use in restricted spaces. Steel cage guides and evenly spaces rollers for reduced friction, vibration, and noise. Through-hardened, high-carbon chromium steel rollers for heat tolerance and durability under heavy loads…
Read more about this product
1 Review
6202-5/8-2RS (I.D.=5/8", O.D.=35mm, Thickness=11mm). 6202-5/8-2rs bearings are sealed on BOTH SIDES to keep lubricant in. Chromium Steel long-life bearings, smooth and low noise. ABEC Tolerance 1 (P0), Z2 Noise Level for most general use. Static load rating of 3720 newtons and dynamic load rating of 7650 newtons.
1 Review
SMR85ZZ (I.D.=5mm, O.D.=8mm, Thickness=2.5mm). Bearings are shielded on BOTH SIDES to keep lubricant in. Stainless steel races for durability and corrosion resistance. ABEC Tolerance 1 (P0), Z1 Noise Level for most general use. Dynamic load rating of 166.5N and static load rating of 64.8N.
1 Review
Model: 09074 (Bore: 19.05mm / 0.75", Width: 21.539mm / 0.848"). Single cup (outer ring) for connecting to cones (inner ring assemblies, sold separately) to form a complete single tapered roller bearing. Components are separable and interchangeable that easy for maintenance. Features low friction and low noise that provide operational reliability. Offers…
Read more about this product
1 Review
MR128K (I.D.=8mm, O.D.=12mm, Thickness=2.5mm). mr128k bearings are open type for lubricating. Made from Chrome Steel (GCr15), durability and resistance to under heavy loads. ABEC Tolerance 1 (P0), Z2 Noise Level for most general use. Static load rating of 219 newtons and dynamic load rating of 462 newtons.
1 Review
1" Bore. 52mm OD - Curved. Wide Inner Race. Self-Aligning Bearing. Standard Duty.
1 Review
[SIZE] - 1/4" Diameter Grade G10 Precision Balls. [MATERIAL] - Made of Chrome Steel(AISI 52100), features with polishing smooth surface, great wear-resistant and high hardness. [FEATURES] - Wide range of applications(maintain industrial equipment or use for family DIY projects); Cost-effective(can repair existing products). [APPLICATIONS] - Maintain…
Read more about this product
1 Review
I.D. (Fw)= 1", O.D. (D)= 1-5/16", Width (C)= 1-1/16". ST14 steel drawn cup, GCr15 needle rollers one way clutch. Good heat tolerance, high load carrying capacity and stiffness. Low cross section, enable downsizing and suit for use in restricted mounting spaces. Pre-Lubricated. Good running properties.
1 Review
Thrust washer for use with Koyo Torrington NTA-series thrust needle roller and cage assemblies in applications where adjacent components cannot serve as raceways. Through-hardened chromium steel for durability and resistance to deformity under heavy loads. Flush-ground raceways for higher speeds and greater running accuracy than unground raceways…
Read more about this product
1 Review
Model: 30202(Bore: 15mm, Outer Diamter: 35mm, Total Thickness: 11mm). Single row tapered roller bearings must be used either with a second bearing or as a matched pair. Components are separable and interchangeable that easy for maintenance. Features low friction and low noise that provide operational reliability. Static Load Rating of 13.4kN and Dynamic…
Read more about this product
1 Review
Package includes 10 bearings. Carbon steel deep groove ball bearings. 2 rubber shields. Radial bearings. 8mm inner dimension, 22mm outer dimension, and 7mm width.
1 Review
Single-row bearing for supporting radial loads. Double shielded to keep lubricant in and contaminants out. Chrome steel for durability and resistance to deformity under heavy loads. 34,000 RPM limit with grease lubrication. Dimensions suitable for use in such applications as skateboards, inline skates, and scooters.
1 Review
R12-2RS Bearing: With both rubber sealed, this R12-2RS bearing can effectively save grease,extending the life of machine. Bearing Material: Made of chrome steel manufacturing, can deliver high performance and high load capacity. R12-2RS Bearing Size: 3/4inch x 1-5/8 inch x 7/16 inch. The high accuracy of the bearings enables excellent high-speed…
Read more about this product
1 Review
Two-bolt housing with ball bearing insert for a ready to mount installation. Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads. Relubricatable solid one-piece housing pillow block for maximum strength and rigidity. Non-expansion-type bearing with setscrew locking collar for secure attachment to guided…
Read more about this product