💻 Computer Components
1 Review
Model: CF1015H12D. Current: 0.42AMP. Voltage: DC 12V. Power Connector: 4-Pin Header. Fan Dimension (L x W x H): approx. 95MM
1 Review
Heatsinks copper pad shims with Thermal Conductive Adhesive Tape. Fits for Raspberry Pi models A, B, B , 2, 3 ,4 boards//CPU/GPU VGA/RAM/VRAM/VRM/IC/Chips LED/MOSFET Transistor. Thermal conductive adhesive tape backing,good performance on heat dissipation and long lasting. Package included :40 pcs aluminum heatsink. Dimension: 9 x 9 x 5mm…
Read more about this product
1 Review
Package Included:10 pcs PCI Slot Cover;5 pcs Screws. Material: Hard Steel. Color: Black pci slot cover. Size:4.72 x 0.78 x 0.47 inch / 120 x 20 x 12 mm. Design:Standard vent slot cover covers open PCI slot. Feature:Standard design with mounting screws for easy installation. Can fit in most full profile computer cases.
1 Review
Stand-alone reservoir. G1/4" Ports. Installation height: 110mm. Diameter: 60mm. Capacity: ~150ml
1 Review
Easy to use by some simple commands, you don't have to know any fingerprint technology, or the module inter structure. Commercial fingerprinting algorithm, stable performance, fast verification, supports fingerprint enrolling, fingerprint matching, collect fingerprint image, and upload fingerprint feature, etc. Capacitive sensitive detection, just touch…
Read more about this product
1 Review
Power Supply, 5V/4A, OD 5.5mm, ID 2.1mm, Applicable for Jetson Nano. Category: US plug power supply. Voltage/Currency: 5V/4A. Connector: OD 5.5mm, ID 2.1mm. Applicable for electronic products like Jetson Nano
1 Review
Hypro sleeve bearing cooling fan 40mm 12V DC. Dimension (40x40x10mm), Connector (2-pin-2.5mm), Wire length (5.6"/150mm), Weight (13.5 gram). Air flow (5.49 CFM), Speed (6500rpm), Noise level (25.1dBA), Life time (40,000 hours), Working Voltage (10.8-13.2VDC). Can be used for for cooling stepper motor driver, 3D printers, NEMA 17, Thermoelectric Peltier…
Read more about this product
1 Review
[ Electronic DIY Kits ] DIY electronic soldering kits with battery case consists of 19 Red LED lights, when you finish soldering and power on, the LED lights strip will light up and spin, looks like a spinning windmill, the speed can be adjusted by buttons. [ Easy to Assemble ] PCB board has a clear marks of every component, it not hard to solder even…
Read more about this product
1 Review
Requires a GIM RGB lighting controller and hub, sold separately. 120mm fan blade engineered for Low-Noise operation without sacrificing performance. The single pack is only for who need more KB-28 fans( Need controller ). Keep your system cool with powerful fan speeds up to 1, 300 RPM, pushing up to 33.5 CFM of air. No Risk to Purchase: Any quality…
Read more about this product
1 Review
TFT size:1.14" diagonal, Voltage:3.3V, Interface:SPI, Driver: ST7789, Color:Full color. The Mini PiTFT - 135x240 Color TFT Add-on for Raspberry Pi is your little TFT pal, ready to snap onto any and all Raspberry Pi , to give you a little display. It's also nice and compact so it will fit into any case. This display is super small, only about 1.14"…
Read more about this product
1 Review
New Logo - LOLIN (previous WeMos), D1 Mini. Upgraded from previous version (V3.0.0,V2.3.0,V2.2.0). Further optimize the circuit. Breadboard friendly. Compatible with MicroPython, Arduino, Nodemcu
1 Review
eMMC Module - 16GB. Size: 0.73*0.63 inch. Work with NanoPi M4/NanoPi M4V2 Single Board Computer
1 Review
Designed for low profile systems at only 23mm tall. Two O6mm heat-pipes and aluminum fins for excellent heat conducting efficiency. Heat-pipe direct contact (HDC) technology. Large, custom 80mm fan for excellent cooling and low noise. For use with CPUs up to 65W. Support Intel LGA115X processors
1 Review
Very useful in transferring breadboarded prototypes to reliable and permanent circuits. 4 popular breadboard arrangements for various circuit scales. Adaptable with a variety of MCU boards. Compatible with Arduino Nano, ESP8266, NodeMCU, etc. Gold plated finish to prevent oxidation, and all holes are through-plated for mounting strength. Lead-free and…
Read more about this product
1 Review
Wide 6.5-V to 45-V Operating Voltage. PWM Control Interface. The DRV8871 device is a brushed-DC motor driver for printers, appliances, industrial equipment, and other small machines. Two logic inputs control the Hbridge driver, which consists of four N-channel MOSFETs that can control motors bidirectionally with up to 3.6-A peak current. Package Included…
Read more about this product
1 Review
Tri-Loop Addressable RGB Lighting - 24 Addressable RGB LEDs are uniformly arranged around the crystalized loop design with an additional 6 Addressable LEDs on the fan hub. Silent Driver IC and Cooling Technology - Silent Driver IC with noise reduction technology offers smooth rotation reduced vibration and fan noise delivering quiet performance even at…
Read more about this product
1 Review
EK-CoolStream Classic PE 240 medium thickness copper radiator for water cooling PCs. Designed with a low FPI (13) allowing for high-performance cooling at low fan speeds due to the thicker core and low restriction. Use with low speeds fans to achieve a near silent PC. This product features two G1/4 threaded ports. EK recommends the use of EK compression…
Read more about this product
1 Review
Supports raspberry pi zero only. For Raspberry Pi Model A/B/B+, Raspberry Pi 2/3/3B+, please search “B012QRGUCQ”. Sensor: 1/4 inch OV5647 sensor in a fixed-focus lens, angle of view: 160° diagonal. Integral IR filter, visible light. Still picture resolution: 2592 x 1944, Max video resolution: 1080p. Dimension: 60mm × 11.5mm × 9.5mm. NOTE: raspberry pi…
Read more about this product