💧 Cooling & Water Pump Tools
3 Review
For pressurizing cooling system in GM and Ford vehicles.
3 Review
VACUUM TYPE COOLANT FILLING FUNCTION: Pneumatic vacuum coolant filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into the cooling system.(Need vacuum pump and not included in the kit) Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes…
Read more about this product
3 Review
AN ESSENTIAL TOOL: The hand pump leak detection tool pressurize on the reservoir, and watch for pointer drop over time to confirm system leak down. If there is any crack in the cooling system, the water in the tank will leak out under pressure, shows the fracture position, such as the tank, hose, a loose connection, etc. Check regularly, repair promptly…
Read more about this product
3 Review
◇ Size: 32mm (1.26"). ◇ For the purpose to remove water pump on models with temperature dependent viscosity drive fans. ◇ Fan Clutch Wrench removes lock nuts on the thermo-Viscous fans. ◇ Fan Clutch Holder allows the technician to hold the water pump pulley in place while loosening the radiator fan. ◇ Suit for:M4,M10,M20 ,M30…
Read more about this product
3 Review
Stubby tool design allows access to timing belt sprocket without interference from vehicle frame. Works on 1.6L engines in 2004-current Chevrolet Aveo excluding 2009 with variable timing engine and 1999-2002 Daewoo Lanos. Also works on the Chevrolet Optra in markets outside the US. Heat treated alloy steel for strength.
3 Review
MULTIFUNCTION: The set is a all in one comprehensive radiator tool kit, includes leak detection, temperature measurement and coolant filling functions. The hand pump tester pressurize on the reservoir/cap, and watch for pointer drop over time to confirm system leak down. Pneumatic vacuum filler first sucks and forms a vacuum on the cooling system by…
Read more about this product
3 Review
Offers a large color coded gauge with reading up to 30pounds. The gauge facing will give you accurate reading in kpa. and pounds. As a safety feature there is a pressure release bar that when turned, it will release the pressure in the radiator neck or the Radiator cap for easy release. Professional quality. High quality material construction.
3 Review
Durable Material: It is made of high strength stainless steel, durable and sturdy, long service life. The base was made of composite rubber material for extending machine life. Noise Reduction: This Vacuum Pump comes with 2 silencers, reducing the motor vibration and noise and making the vacuum pump run quieter. Easy Monitoring: This vacuum pump comes…
Read more about this product
3 Review
Vacuum Pump size: 16.7 x 6.3 x 10 inch (42.4 x 16 x 25.4 cm). Vacuum Pump, 110V 60HZ (voltage); 1 HP (Power); 12CFM (Free air displacement); 0.3 PA (Ultimate Vacuum); 500ML (Oil Capacity); 1720RPM (Rotation Speed). Robust die-cast aluminum housing and excellent heat-dissipation capacity -- Greater heat resistance and abrasion resistance. Air Vacuum Pump…
Read more about this product
3 Review
When performing cooling jobs or any job that involves removal of the viscous fan, this tool will save you a lot of time. Material: vanadium steel. Lock it onto the waterpump face and use 32mm or 36 mm (both included) spanner to undo the nut. Fan Clutch Holder fits BMW engine models : M10, M20 , M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14…
Read more about this product
3 Review
Size: 32 mm (1.26 inches). Only applicable to the following engine models in the BMW models described in the title: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32. In order to disassemble the water pump on models with temperature-dependent viscosity-driven fans. Note: This 32mm fan clutch nut wrench is…
Read more about this product
3 Review
Carburetor Replace # 16100-ZH8-W61 16100-ZH8-W51 16100-ZE1-814 16100-ZE1-825; Ignition coil Replace # 30500-ZE1-033 30500-ZE1-063. Carburetor fit for Harbor Freight Branded 212CC Chicago Electric Predator Gasoline Engine. 212CC Carburetor fits for Harbor Freight Predator 6.5hp Go Kart OHV Engine; 212CC Carburetor fit Harbor Freight Predator 60363 68121…
Read more about this product
3 Review
Removes and installs water pump assembly. Angled teeth prevent the tool from slipping. Use a 1/2" drive ratchet ore breaker bar to turn wrench. Fit type: Universal.
3 Review
🔧 Fit: BMW M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.Also fit some Ford, GM, and Chevy models. 🔧 Material: high strength steel for durability and a long life. 🔧 This Fan Clutch Tool Removal kit Designed to easily remove lock nuts on the temperature dependent thermo-viscous fans. 🔧 Packing include…
Read more about this product
3 Review
-Removing fan clutches to replace Water pumps or for other engine service doesn't have to be a headache. -A must for any front engine service. -Fit into close quarters where conventional wrenches just won't get the job done. -Heat treated to with stand high torque needed to remove some fan clutches. -Blow molded case for easy storage and transport.
3 Review
Excellent Quality: The turbine shaft seal installer kit is made of premium grade heavy-duty steel with polishing, rust-proof, sturdy, and durable, ensuring a long-term use. Reliable Performance: Turbine shaft transmission tools are designed to assist in installing turbine shaft seals into their proper grooves and determining the size or compress each…
Read more about this product
3 Review
Direct replacement for a proper fit every time. Easy to install - no special tools required during installation. This part has undergone vehicle try-on testing to meet product standards and quality. Compatible with our Engine Coolant Check Valves, sold separately.
3 Review
CUSTOM PURPOSE SET---This 2 piece tool set includes an extra-long 32mm wrench and purpose built holding tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines, compatible with most BMW E-series sedans including the E34, E36, E39, E46, E90, and more. GALVANIZED CARBON STEEL---These timing repair tools…
Read more about this product
2 Review
All Makes water pumps fit GM vehicles as well as a wide range of non-GM vehicles. Thoroughly tested for reliable, leak-free performance. Coated seals support seal longevity and durability. Heat-treated shaft assemblies provide superior strength and durability over non-treated assemblies. High-quality bearings are permanently sealed and lubricated for…
Read more about this product
2 Review
VACUUM TYPE COOLANT FILLING FUNCTION: Pneumatic vacuum coolant filler first sucks and forms a vacuum on the cooling system by using shop air, then draws coolant into the cooling system.(Need vacuum pump and not included in the kit) Add coolant in vacuum, there is no large air pocket and avoid warping or other damage in engine. Normally, it takes…
Read more about this product