πͺ Cutting Tools
2 Review
Extended spurs cut crisp, clean holes quickly in thick stock. 1/4" quick-change shank works with drills or impact drivers. Each bit forged, heat-treated and stamped clearly with sizes for easy identification.
2 Review
Function: This practical woodworking tool helps to give you consistent control of drilling depths easily. Material: This drill bit depth stop collars set is made of high carbon steel features high hardness, strong strength and long durability. Different Bits: 3mm, 4mm, 5mm, 6mm, 8mm, 10mm, 12mm and 16mm drill depth stops will fit drill bits in differentβ¦
Read more about this product
2 Review
Bosch-exclusive Progessor tooth geometry for fast performance and long life. Reinforced shoulder for added strength and longer life. Hole saw teeth are made with an 8% cobalt alloy for longer life and higher heat resistance. Includes a power change mandrel with a 3/8 In. shank and pilot bit. Compatible with Bosch Quick Change mandrel system.
2 Review
Heavy-duty high-speed drills for drilling in a wide reange of operating conditions and materials. Black & Gold Oxide surface treatment increases wear resistance and adds lubricity to improve chip flow. 135 degree split point. Split point is self centering and excellent for hand help and machince applications. Sizes 3/16 in. and above have a flattedβ¦
Read more about this product
2 Review
βΆ100% Brand New and High Quality. Swivel head flips and locks from drilling to driving,Easily switch between bits in seconds. Works with your own power drill. Ideal For DIY, Home And General Building/Engineering Using. βΆMaterial: HSS Original package: resealable plastic case Size of case: 195*44*75 mm Total weight: approx 0.37 kg. βΆScrewdriverβ¦
Read more about this product
2 Review
The best cutting result for drilling in asphalt, brick, concrete, dry wall, marble, tile, wood, composite, etc; Carbide Tip Pilot Drill bit is required. Fit arbors with 5/8-18 UNF Thread; 2-1/4β Cut-Depth allows for easily cutting through thick or layered building materials in one pass. Quality Carbide Teeth have high hardness, outstanding wearβ¦
Read more about this product
2 Review
6.7mm diameter carbide tipped jobber length drill 118Β° standard point. 73mm flute length. 105mm overall length. Used by machinists and hobbyists for general purpose drilling of most materials. Precision Ground. Tool Diameter Tolerance: +0"/-.001".
2 Review
Contains a standard 3-1/2-inch raised panel bit and a pair of standard 1-3/4-inch rail & stile bits. Anti-kickback design, Non-Stick Orange Shield CoatingB000P4LOHY. 2 SinterHip Hi-Density Industrial Chrome Carbide cutting edges for long-lasting performance. For cutting plywood, hardwood/softwood on router tables only Not for use on hand-held routersβ¦
Read more about this product
2 Review
Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics at a much faster speed than bi-metal hole saws. Tough tungsten carbide tipped teeth have a positive cutting angle which provide fast and efficient removal of chips and swarf. Ideal for production cutting and particularly suitable for use in drills withβ¦
Read more about this product
2 Review
Annular Cutters: 9/16" x 1" Depth, 9/16" x 2" Depth, 11/16" x 1" Depth, 11/16" x 2" Depth, 13/16" x 1" Depth, 13/16" x 2" Depth. Pilot pins: 1/4" x 3" overall length, 1/4" x 4" overall length. Work with most of the magnetic drills on market. Drill wood, various metal materials, steel plate, aluminum, brass, cast iron, stainless steel of lower BHN, etc.
2 Review
Razor sharp cutting edge diamond honed for smooth cuts. Triple tempered shank for maximum durability. Industrial micrograin carbide for smooth cut. For window sills, shelves or stair treads.
2 Review
Cuts extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back. High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting. Made in China.
2 Review
Ideal for electrical and plumbing tradesman. Hole saw has thin .020-Inch sidewall blade thickness which allows for faster cutting and longer battery life. Ideal for chargeable impact drivers. Special 8 TPI tooth design for smoother cuts in sheet metal. Made in China.
2 Review
1-3/4-Inch depth. Tough 3/16-Inch thick back plate. Deep gullet design for improved chip removal. Cuts through 2-Inchx4-Inch in one easy pass. Faster cutting and more holes per saw.
2 Review
3/8 to 5/8-Inch Max Board Thickness, 1/2-Inch Cutting Length, 2-25/64"-Inch Overall Length. 2 Hi-Density carbide-tipped cutting edges for long-lasting performance on wood. Anti-kickback design to control the depth of cut and work safely. Make strong, perfectly fitting joints quickly and easily. For making fine drawer fronts easily.
2 Review
Straight router bit with 1/4-inch heat-treated, hardened steel shank; double flute for quick cuts. Dynamically balanced up to 24,000 RPM to reduce vibration and kickback. Non-stick powder coat finish reduces friction and resin build-up to protect from corrosion. Premium quality Super Fine Grain Tungsten Carbide for an exceptionally smooth finish. Sizeβ¦
Read more about this product
2 Review
2-1/2 inch diamond hole saw, for tiles, glass, ceramics, porcelain, quartz, granite. Standard triangular 3/8 inch shank fits standard drills. Steel alloy body with side slots help cooling the tool and extracting material core. Increased tool body for thicker 3cm quartz countertops. Depth of cut is over 1-1/4 inches. Drills Through Toughest Materialsβ¦
Read more about this product
2 Review
-Material: This leather prong punch tool set is is made of solid steel and integral heat treatment, which has the advantage of high strength, good wear resistance and long service life. -Feature: The surface of the lacing stitching chisel tool is blackening and lacquer baking, fine polishing and coated with rust inhibitor, which will not easy to rustβ¦
Read more about this product
2 Review
MULTI-FUNCTIONAL: 2mm/0.07inch, 2.5mm/0.09inch, 3mm/0.11inch, 3.5mm/0.13inch, 4mm/0.15inch and 4.5mm/0.17inch, six caliber specifications can meet the needs of basic punching, according to your own needs to freely switch the required caliber and good for Belts, Watch Bands, Straps, Cardboard, Membership Card, etc. With one 100x2mm/0.07inch diamond fileβ¦
Read more about this product
2 Review
1/2" Tool Bit Capacity. Interchangeable with KDK same series tool holders. All of our KDK style tool Holders fit all of the 100, 150, & 200 size bodies as they all have a 1.75" dovetail. All working parts hardened and ground.