🌡️ Engine Cooling & Climate Control
1 Review
Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles. Complete package - assembly is designed with the same materials and components as the original part. Quality assured - motors are tested in laboratory settings to ensure performance. Cost…
Read more about this product
1 Review
Brand Name: SouthMarine, Sold by Marine Parts Manufacturer. Plastic Hub, Depth:18.56mm(47/64"). Can't just rely on horsepower to judge, please check the dimension with your old one carefully, if you still can't confirm that, please consult us. Outer impeller overall Diameter: 51.65mm(2 1/32"). Internal shaft insert Diameter : 18.54mm(47/64").
1 Review
Stant's STAT LOK adhesive-backed thermostat gaskets cut installation time by as much as 50%. The adhesive backing holds the thermostat securely centered in the counter bore, leaving both hands free to align and bolt down the outlet casting. No sticky, toxic gasket cement is required. With a knuckle-saving Stant Stat Lok gasket holding the thermostat in…
Read more about this product
1 Review
Interchange Part Numbers: 19208815 19253263 12600767. BRTEC’s 18-month warranty and is included free with all BRTEC brand water pump. Your water pump is guaranteed to remain in good operating condition while you own it. All of our customers buying BRTEC brand water pump are covered. This policy and any postage (at the domestic 1st Class rate) involved…
Read more about this product
1 Review
Blocks and controls odors with Febreze Freshness. Unscented for fresh, clean air smell. Prevents odor-causing bacteria and mold growth on the filter. Filters out fine dust particles, dirt, soot, pollen and other inert allergens from entering the vehicle's cabin. Unlike HEPA type cabin air filters, PurolatorBOSS Premium Cabin Air Filters provide high…
Read more about this product
1 Review
Brand New Unit - Made in Taiwan. OEM Fit and Performance. One Year Warranty. Interchangeable with TYC 700198.
1 Review
It integrates design elements of both a thermostat and a water outlet. This allows for a simplified design since parts of the water outlet function as the thermostat flange. This also aids in installation because the orientation of the thermostat is fixed in place as the water outlet is bolted to the engine block. Gates - Driven By Possibility.
1 Review
Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles. Complete package - assembly is designed with the same materials and components as the original part. Quality assured - motors are tested in laboratory settings to ensure performance. Cost…
Read more about this product
1 Review
Brand New (Not Remanufactured) Parts. OE Original Fit and Performance. Gasket Included. One Year Warranty / 30 Days Return Policy. Interchangeable with GMB 120-3072 and Airtex AW7145.
1 Review
100% factory tested for leakage and dimensional precision. Bearing noise and durability tested. Designed to match OE coolant flow rate and pressure. Precision-ground shaft and hub accept OE fan clutches perfectly. All required hardware included for easy installation.
1 Review
To allow room for the occurring thermal expansion, OE clevis pins are included where it is required. To reduce stress on the headers and prevent warping during thermal expansion, stress cuts are made to the side rails. Increased tube wall thickness for durability and longevity. Manufactured with high quality material for extended durability. Subject to…
Read more about this product
1 Review
To allow room for the occurring thermal expansion, OE clevis pins are included where it is required. To reduce stress on the headers and prevent warping during thermal expansion, stress cuts are made to the side rails. Increased tube wall thickness for durability and longevity. Manufactured with high quality material for extended durability. Subject to…
Read more about this product
1 Review
Fit most rods and classics engines including GM (CHEVY, GMC, OLDS, CADILLAC, PONTIAC, BUICK, FORD, & MOPAR (CHRYSLER, DODGE, PLYMOUTH). High Torque Motor ,Sealed Ball Bearings,& Blanced Curved Blades Ensures low noise levels and long life. Measurement of fan:14" X 14 3/4" X 3" thick. 4 Point Mounting bracket is included. 14" Electric Fan is set up as a…
Read more about this product
1 Review
Ideal replacement - this engine cooling fan assembly was precision-engineered to match the fit and performance of the stock radiator fan assembly on specific vehicles. Complete package - assembly is designed with the same materials and components as the original part. Quality assured - motors are tested in laboratory settings to ensure performance. Cost…
Read more about this product
1 Review
For Mercury and Mariner Outboard Motors. Applications: 30 HP Jet SN. C159200-G589999 / 35 HP SN. 6445653-Up / 40 HP SN. 4890103-6445653 / 40 HP (4cyl) SN. C159200-Up / 45 HP SN. 5531630-Up / 50 HP (4cyl) SN. 4962056-Up / 50 HP (3cyl) SN. 6428681-D000749 / 60 HP SN. 6428681-D000749 / 65 HP (3cyl) SN. 4382057-4571651 / 70 HP SN. 4977157-B110053. Kit…
Read more about this product
1 Review
Four Seasons 46006 Standard Rotation Thermal Standard Duty Fan Clutch (46006). Part number: 46006. Package Weight: 2.55 pounds. Package Dimensions: 11.43 H x 16.51 L x 16.256 W (centimeters).
1 Review
Meets or exceeds OE design and performance. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM specifications. Motor RPM equivalent to or exceeds OEM motor. Flanged vented CW blower motor with wheel.
1 Review
COMPATIBILITY: Fit for Honda 40 50 hp BF35A, BF40A, BF40D, BF45A, BF50A, BF50D outboard. REPLACEMENT: Replace Part Number 06193-ZV5-020, 06193-ZV5-010, 06193-ZV5-000. FUNCTION: It is used to repair/rebuild the water pump impeller for Honda outboard engine, making service job easier and more convenient. MATERIAL: Our water pump impeller repair kit is…
Read more about this product
1 Review
Country of Origin : United States. The Package Height of the Product is 6.34 inches. The Package Length of the Product is 9.11 inches. The Package Width of the Product is 6.32 inches.
1 Review
Quality-assured with 100 percent leakage and functional tests of seals, bearings, castings and fully assembled water pump. Fits and performs exactly to OE specifications and requirements. Premium water pumps are designed to enhance the performance of the equivalent standard pump. Backed by a limited lifetime warranty.