🛠️ Engraving Machines & Tools
2 Review
【Laser head】This blue-violet laser head is suitable for NEJE 1000mW DIY engraving machine, easy to install, faster, supports more types of materials. Bright blue-violet light make it easy to position when carving. 【High performance】Professional adjustable laser head is easy to adjust, with high speed, high precision, high stability and high efficiency…
Read more about this product
2 Review
Material: Hight quality Znse crystal. Focal Length: 63.5mm/2.5" ; Dia:18mm/19mm/20mm/25mm optional; Thickness:2.2-2.3mm;. Double-sided solid Coating;Resistance to wipe;High transmittance; Long service life. It's good for 40W/50W/80W/100W/130W/150W CO2 laser 10600nm 10.6um. It can be used for CO2 laser engraving and cutting well.
2 Review
Fast and easy way to protect your valuables. Suitable for metal, plastic, wood, leather, stone and glass. Includes pointed and round burrs. Requires (2) AA batteries (included). To change/replace tip: Hold tip and pull firmly out of chuck. Press new tip firmly in place.
2 Review
【2 - in - 1】: 7000 mW laser module and 3 Axis router engraving. Suitable for carving wood, plastic, acrylic, PCB, soft metal like copper and aluminum and other similar material. However, the CNC milling machine can't carve hard metals, jade and other hard things. 【Offline Controller and CNC 】 Upgraded control board, integrated heat dissipation and fan…
Read more about this product
2 Review
Air Pressure:0~3kg/c. Rotate Speed: 100~4000RPM. Weight: about 0.15kg/pair.
2 Review
Paint color: H21 Off White (Gloss). Solvent-based Acrylic. Not recommended for ABS resin parts. Lacquer Paint. Capacity: 10ml
2 Review
2 Pack Tungsten Carbide Tip Scriber with 2 free replacements marking tip. Permanent magnet on this etching tool picks up small parts and retrieves steel chips from hard-to-reach places. Comfort to Use: Handy pen-style design with convenient pocket clip, Knurled aluminum handle provides maximum control and comfort. Easy to Store: Each Engraving pen comes…
Read more about this product
2 Review
【Specificity and Good compatibility】 It is designed exclusively for Engraving Machine and can be applicable to 30w-40W laser tube of a number of manufacturers. Quick response speed. 【Perfectly performance】Large cutting power.Powerful Features and High Integrity. High-efficiency, high-frequency, high-speed carbon dioxide laser matching power supply…
Read more about this product
2 Review
▶【12 in 1 Screwdrivers Set】 This screw driver set contains total 12 pcs different sizes screwdrivers bits as: trox T6/T9, hex H1.5/2.0/2.5mm, phillips 1.0/1.3/1.5/2.0/2.5mm, slotted 3.0mm, middle slotted 0.6mm, very useful. ▶【Slip-Resistant Handle--Efficiency】 Ergonomically and slip-resistant designed handle for comfortable grip and easy to use, improve…
Read more about this product
1 Review
Quality Material: Round disc made of clear acrylic, these acrylic sheets are not easy to break even if they fall and allow clean up after using. Wide Range of Use: Round acrylic sheet sign is great for cricut cutting, product display, wedding and party signage, painting and calligraphy, schedule and many other DIY art projects and crafts. Protective Film…
Read more about this product
1 Review
➤➤【HIGH-QUALITY MATERIALS】Made of quality metal material,not easy to bend and break.Carbide comes more sharper edge, higher wear resistance and higher efficiency. ➤➤【POWERFUL FUNCTIONS】High concentricty and high speed; the bit can cut clean without any ragged edges, no burrs.High precision and convenient to use, practical accessory for jewelry processing…
Read more about this product
1 Review
🛠【PRE-ASSEMBLED】CNC Engraver is very easy to assemble and use. JUST DO THE UNBOXING AND LOCK 6 SCREWS when receive it, then, step on your creating journey. 🛠【CUSTOMISED SETTINGS】CNC Router have the rotate speed control system which are the two alternatives of CNC mode: ADJUSTABLE ROTATE SPEED MODE AND CONSTANT RATE MODE. You may decide the rotate speed…
Read more about this product
1 Review
This economy engraving block is ideal for the beginning or hobbyist engraver or stone setter. The set includes a variety of attachments to be used for holding your piece while you work. The jaws of this engraving block are integrated into the unit and do not lift off of the block. Top rotates 360 degrees.
1 Review
One Pair Includes 2PCS ,Due to the laser tube is round, so the laser tube support cannot completely fit the tube. The laser tube holder only serves as a shelf. Good Matching & Easy Assembling. Easy to Install and Disassemble without Tools. Convenient to Set the Tube Height with the Lift Screw. Adjustable Diameter is 50-80mm, Adjustable Height is 40-60mm
1 Review
Suitable for laser machine of engraving area 300 x 400mm and 300 x 500mm.
1 Review
This product is perfect for your next craft project!. This item is definitely a best seller!. We designed this item to make your artistic dreams a reality. Model Number: 655350584771.
1 Review
Compatibility: This blue-violet laser head is specially designed for engraving machine, which is a perfect replacement for NEJE 1500mW engraving machine. Used directly for laser positioning, measuring, pointing and sensing devices. High Performance: It is widely used in materials required by industries such as hardwood, plastic, bamboo, rubber, leather…
Read more about this product
1 Review
The spherical bottom sits in a socket ring so you can tilt it in any direction. Flexible operation 360 degree hemispherical rotation, sensitive operation. Fine workmanship, sensitive operation, convenient and easy to use. There is a double ball bearing system for smooth rotation without looseness or wear inside. Easy to control and can install ring…
Read more about this product
1 Review
Extra-long Gooseneck, Upgraded Clamp - It features a 26-inch flexible aluminium goose tube twice as long as other magnifier goose tubes on the market. The magnifier with light has a larger reachable range and is strong enough to be flexibly shaped to fit your field of view. No need to lower your head. Newly designed clamps with additional protective…
Read more about this product
1 Review
Laser engraving machine 3000 MW will help in the manufacture of gift products, stained glass. The engraving machine is useful for hand-made craftsmen - to apply a logo on their products. It will look especially cool on leather or craft paper. The quality of the burning is high, even on small labels small print is read without problems. The 3000MW baby…
Read more about this product