π© Fasteners
1 Review
Diameter: 7/16". Length: 1-1/2 inch. Material: Steel. Finish: Plain. Type: Tension Pin.
1 Review
γQuestion: Will it rust? Answer: Noγ:TINGZHIGO Safety Coupler Pin is made of 316 stainless steel. In humid air or high-temperature weather, compared with 304 stainless steel or iron material, 316 stainless steel has stronger anti-rust, abrasion resistance. γHow to choose the right size?γ: Size: 2.756 Inch(70mm)Length and 0.315" (8mm) diameter. Shapes ofβ¦
Read more about this product
1 Review
For best results use Grip-Rite GRTCR175 15 degree coil roof nailer. Compatible with most 15 degree coil roof nailers. Should not be used with treated lumber. Should not be used where surface rust is unacceptable. Meets or Exceeds ASTM F1667 (if applicable). 1-1/4" x .120" x 3/8" Diameter Thin Flat Head, Coil Roofing Nails. Electro-Galvanized, Smoothβ¦
Read more about this product
1 Review
#6 and #8 screws use T-15 bit; #9, #10, and #12 use bit T-25. Self-tapping, countersinking head; W-Cut thread design. One pail contains 480 screws. Climatek coated for all weather corrosion protection conforms with ICC#2442. For use in wood, particle-board, cement fiberboard, plastic, and sheet metal
1 Review
Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6". Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible. Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures. Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need forβ¦
Read more about this product
1 Review
Used for joining steel to steel. Re-useable, full-visibility packaging simplifies product selection and storage. High-strength, all-steel construction. Repair many household products. Size: 1/8-inch by 1/8-inch.
1 Review
This is for the vinyl wall decal shown in the picture. Item Package Dimension: 2.5" L x 1.4" W x 1.6" H. Country Of Origin: Taiwan, Province Of China. Package Weight : 0.2 pounds.
1 Review
Phillips Drive Size: #3. Thread Size:1/4-20; Thread Pitch: 20 TPI; Thread Type: Coarse Thread/ UNC; Thread Style: Right Hand. Exterior Finish: Bright Finish; Color: Silver Tone; Quantity: 50 PCS. Made of 304 stainless steel (no coating outside), provides good strength and corrosion resistance in bad environments. Screw Length:3/4 inch or 19mm ( measuredβ¦
Read more about this product
1 Review
Diameter 1: 1/2 inch. Diameter 2: 3 inches. Length: 3 inches. Thickness: 1/8 inch. Material: Steel.
1 Review
H suffix for hex head. PF suffix for phillips head. Heat treated carbon steel. 100 per box.
1 Review
Head Type: Round head, slotted/phillips combination. Diameter-Thread Size & Length: #6-32 x 1-1/2 inch. Use with nuts or pre-threaded holes of the same diameter & thread size. Often used in machinery & appliances. Nuts and washers not included.
1 Review
SPARTAN MOUNTS TOOL MOUNT FOR MAKITA 18V POWER TOOLS - Customized for the Makita 18V Power Tool System. USA-made, 3D-printed for precision fit. Compact for organized installations. Available for many other tools and batteries so you can custom-mount your entire collection. Note: Our mounts do not work with the circular saw due to the non-standardβ¦
Read more about this product
1 Review
RIVET LONGER: tungsten rivet block absorbs more vibration than steel, reducing fatigue from bucking rivets. ERGONOMIC: save your hands! Tungsten reduces wrist strain and helps prevent long term health issues. COMPACT: fits into smaller spaces than a steel bar, easily working with those hard-to-reach rivets. QUALITY: these long-lasting rust-resistantβ¦
Read more about this product
1 Review
Size: #10 X 1/2 inch OD. Most commonly used and versatile washer. Increases bearing surface and distributes load over a larger area. Can be used to prevent a screw or bolt from going into a hole too far. Can also be used as spacers by stacking more than one.
1 Review
Pre-assembled single unit sleeve anchor available in carbon steel and stainless steel. Can be used in concrete block, brick and stone. 100 per box. Extension sleeves are added to create longer lengths.
1 Review
Multi Sizes: M6x40, M6x60, M8x60, M8x80, M10x60, M10x80. Thread Design: Wood screw thread on one end and a machine screw thread on the other end. Usage: Mainly used to make joints between two pieces of wood, also used to attach legs to furniture. Ideal for wooden furniture jointing. Durable Material: Carbon steel structure with colour zinc surfaceβ¦
Read more about this product
1 Review
High quality plastic. External diameter: 1.3cm. Insert the screw into the washer side of the screw cap, install screw, then snap the cap over the screw head. The screw caps can provide screws good protection from rusting, as well as good decoration for your furniture and wall. Package included:600 x Plastic screw cover caps.
1 Review
Hex Head And Gimlet Point. Brand name: The Hillman Group. Model number: 230006. Item Weight: 1.7 lb.
1 Review
The Length Of A Lag Screw Is Measured From The Dunderhead Bearing Surface To The Tip Of The Screw. Hex Head Is Easily Driven With Simple Wrenches And Requires Minimal Clearance Above The Fastener. Stainless Steel. From The Brand Name: The Hillman Group.
1 Review
Diameter: #10. Length: 3 inches. Material: Stainless Steel. Head Style: Pan (Phillips). Type: Sheet Metal Screw.