🪚 Hole Saws & Accessories
3 Review
M42 cobalt bi-metal cutting edge provides shock resistant teeth and resists tooth slippage. 4/6 positive tooth configuration allows for fast, smooth cuts and less vibration. 3/16-Inch back plate eliminates need for drive plate. Country of Origin: China.
3 Review
Progressor tooth design cuts faster and lasts longer in wood and metal applications. Reinforced shoulder for added strength and longer life. 8 percent cobalt alloy for longer life and higher heat resistance. Works with standard or Quick Change mandrels (Quick Change requires adapters).
3 Review
The best cutting result for drilling in asphalt, brick, concrete, dry wall, marble, tile, wood, composite, etc; Carbide Tip Pilot Drill bit is required. Fit arbors with 5/8-18 UNF Thread; 2-1/4“ Cut-Depth allows for easily cutting through thick or layered building materials in one pass. Quality Carbide Teeth have high hardness, outstanding wear…
Read more about this product
3 Review
New Rapid Core eject holes saws allow you drop out the core at the touch of a button. Carbide tipped for exteneded life and clean cuts. Cuts 5x faster than standard hole saws. Cutting depth of up to 2"
3 Review
【Material】- The hole saws are made of diamond and high carbon steel, offering a combination of hardness and toughness for wear resistance. 【Efficiency】- Small incision resistance,feature drilling stably, fast speed, not breaking the border Opening neat, smooth, no broken edges, no tremor phenomenon, chip Easily. 【Advantage】- Side holes allow for easy…
Read more about this product
3 Review
carbon steel. 【15 Sizes Diamond Drill Bits Set】 6mm(1/4"), 8mm(5/16"), 10mm(3/8"), 12mm(1/2"), 14mm(9/16"), 16mm(5/8"), 18mm(11/16"), 20mm(3/4"), 22mm(7/8"), 25mm(1"), 26mm(1-1/32"), 28mm(1-3/32"), 30mm(1-1/8"), 40mm(1-1/2"), 50mm(2"). Meet most of your different needs. 【Rustless and Cuts Quickly】 Made of high strength carbon steel with smooth nickel…
Read more about this product
3 Review
15 pieces a set diamond drill bits, hole saw core drill style bits. 12 Sizes:4mm, 6mm 2pcs, 8mm 3pcs, 10mm, 12mm, 14mm, 16mm, 18mm, 20mm, 22mm, 38mm. 50mm. Use for for Stone, Tiles, Ceramics, Glass and Granite , Drill Glass, Tile Bottles, Blocks Jars, Fiberglass Porcelain Tile Ceramic, Slate Mable, Granite Light Stone. Warnings: Limit depths in about…
Read more about this product
3 Review
A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten carbide tipped teeth for outstanding cutting performance and product durability. Will cut nail…
Read more about this product
3 Review
A cost effective solution for cutting nail imbedded wood, or wood and metal combination, reinforced concrete and fiberglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten carbide tipped teeth for outstanding cutting performance and product durability. Will cut nail…
Read more about this product
3 Review
Very High Quality Diamond Drilling Tool Set of 5 Different Sizes: 3/4", 1", 1-3/16", 1-3/8", 1-5/8". Over 80% cost savings compared to big box stores. Use with standard electric or battery drillers. There is no need for a center pilot drill. These tools do not have center pilot drills. Do NOT run dry. These Diamond Coated Tools will work best if you use…
Read more about this product
3 Review
Professional Cutting: This 6 inch hole saw bit is designed for wood / plastic cutting. Very suitable for making Cornhole Boards. Sharp Teeth: The teeth are sharp, the vibration is small, more stable operation, and can cut holes quickly and balancedly. Widely Used: Suitable for pistol drill, bench drill, vertical drilling machine, etc. Widely used in…
Read more about this product
3 Review
Large openings in backing plate allows for quick removal of cut material. Wide slot designs on sidewalls and backing plate for increased visibility while cutting. 1 1/2-Inch depth of cut and fleem ground teeth for longer life. Package dimension : 7.02" L x 9.45" W x 3.15" H.
3 Review
Product FeaturesThe Spyder 600034 Rapid Eject 3 Inch hole saw from the category "Hole Saws & Accessories" brings a range of impressive features that make it a must-have cutting tool for any DIY enthusiast or professional. With its new Rapid Core eject system, this hole saw allows you to effortlessly drop out the core with a simple touch of a button…
Read more about this product
3 Review
【HIGH-SPEED STEEL】High-speed steel cutting edge provides shock resistant teeth and resists tooth strippage. Soft, spring steel creates a flexible backing material that allows the hole saw to absorb impacts of the job of drilling holes in difficult-to-cut materials.NOTE: Not recommend used in hard wood, hard metal and stone. 【DURABLE AND…
Read more about this product
3 Review
Carbide grit cutting edge for sharp cutting and long lasting. This hole saw is especially designed to cut alloy materials. Provide fast and precise cuts into stainless steel, sheet metal, FRP and wood. Extreme durability and no teeth breakage for any tough job. we suggest customers to use cutting fluid to keep the hole saw cold during usage.
3 Review
1-3 week to USA with track number, 2-5 week to other country. Product Name : Glass Hole Saw;Brand Name:Flyshop. Drilling Diameter : 12mm / 1/2";Shank Diameter : 6mm / 1/4". Total Length : 50mm / 1.96";Color : Silver Tone;Material : Metal. Net Weight : 22g;Package Content : 2 x Glass Hole Saw.
3 Review
Cuts extremely hard abrasive materials. Cutting edge of tungsten carbide particles bonded to alloy steel back. High heat and abrasion resistance, no teeth to dull or chip, resists snagging and smooth cutting.
3 Review
QCAIDU 5pcs HSS 4341 Drill Bit Hole Saw Sets | Hole Saw Arbors & Kits | Metric Hole Cutter Kit 16mm - 30mm. ✔Shank Φ :6mm,7mm,6mm, 6mm, 8mm (Handle black). ✔Bits Φ: 16mm/0.62'',19mm/0.71'',20mm/0.78'',25m/0.98'',30mm/1.18''. ★《500r / min (bench drill)》. ✔★Packing: plastic box . ★Error range: ± 1mm. ★ W:320g. ✔★Material: HSS 4341. ★Applicable- wood…
Read more about this product
3 Review
4-3/4 In. carbide-tipped pilot bit. For use with MultiConstruction hole saws. Applications include tile, brick and abrasive materials. For use with mandrels PCM38, PCM12, PCMSDSPL.
3 Review
Milwaukee Door Lock Hole Saw Kit. Contains: 1" and 2-1/8" 4/6 Tooth Hole Saw, 3/8" Hex Arbor, Arbor Spacer and Arbor Adapter. This is manufactured in United States. Consists of 1 in. and 2-1/8 in. 4/6 tooth Hole Saw. 3/8 in. hex arbor, arbor spacer and arbor adapter.