🪚 Industrial Drill Bits
2 Review
Size: Cutting diameter: 40mm; shank: 9mm; total length: 80mm; Round shank. Applications: Can be used for drilling holes on wood and wood products perforation, plastic products, furniture, door hinge. Features: Special heat treatment, cemented carbide. Arc design optimizes chip removal. two blade cutter head, Low cutting resistance. the design of the…
Read more about this product
2 Review
This steel forstner bit has a 2-1/8" cutting diameter and a 3/8" shank compatible with all standard drill and drill press chucks. Drill clean and accurate holes in solid wood, plywood and MDF. Constructed from high-speed-steel for quality and longevity. The 3/8" shank is compatible with all standard drill and drill press chucks. Hardened steel…
Read more about this product
2 Review
Alskar diamond standard grade notched-edge segmented core bits provide excellent performance in drilling cured concrete and asphalt. 0.395" (10 mm) segment height; 0.145" segment width. 1-1/4"-7mm arbor; 14" tube length. Use wet only.
2 Review
Super-hard titanium coating lasts up to six times longer than high-speed steel. Self-starting point starts on contact. Balanced double flute eliminates chatter and vibration. Titanium reduces heat for longer life. Drills clean, accurate holes in these thin materials (up to 1/8 In.): sheet metal, ducts, steel, copper, brass, aluminum, plastic, Plexiglass…
Read more about this product
2 Review
Two-step cutting action for precise, clean holes in wood drilling applications. Dura-Tip for extreme durability in nail-embedded wood. Dual cutting edge design for effortless, smooth hole drilling in nail-embedded wood. Deep flutes for fast chip removal. 7/16 in. hex quick change shank increases stability and durability in cordless and corded impact…
Read more about this product
2 Review
Suitable for hard and softwood, coated chip board, laminates as well as MDF plates. High rotation speed. Precise cutting quality. Optimized cutting resulting in an improved running of your drill. Can be resharpened up to 30 times before needing to be replaced.
2 Review
The product is 27/64"splitpt drill bit. Easy to use. The product is manufactured in China. Pilot point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough. No-Spin shank eliminates the frustration of bit spinning in the chuck. Tapered web provides greater durability to reduce breaking. Size markings are located above the…
Read more about this product
2 Review
Made in China. Package height :5.842 cm. Package length :10.16 cm. Package width :5.842 cm.
2 Review
Ship Auger Bits. Durable hardened cutting edge for long life in tough materials, including nail-embedded wood. Fully-forged bit for maximum durability. Wide flutes for maximum chip removal and less binding. Aggressive screw-pitch for faster drilling.
2 Review
12. Made in US. Heavy Duty Jobber Drills for drilling hard to drill materials. Straight Shank/Self-Centering 135* Split Point for quick penetration and easy drilling. Steam Oxide treated High Speed Steel for heat resistance and long tool life. Ideal for drilling high tensile stainless steels, titanium alloys, and other hard steel. Made in USA.
2 Review
SDS-plus hammer steel chisel for wood. Dimensions 3/4 In. x 7 In. Proprietary heat treat process. Typical application includes rough wood removal.
2 Review
W.L. Fuller 10390006. No. 6 Countersink / Taper Drill Bit Set for #5 to #9 Screws.
2 Review
[M2 HSS Coated] M2-Coated HSS cut 5X holes of Titanium Drill Bit(4241 HSS), the hole saw bit can drill more holes for Sheet Metal, Mild Steel, Galvanized Steel,Aluminum,Iron,Wood Plate,PVC and Copper. If you're drilling a lot of sheet metal then seach for this step drill bit. [Also for Stainless Steel] A Test: Drill in 1.3mm thick Stainless Steel square…
Read more about this product
2 Review
Super-hard titanium coating lasts up to six times longer than high-speed steel. Self-starting point starts on contact. Balanced double flute eliminates chatter and vibration. Titanium reduces heat for longer life. Drills clean, accurate holes in these thin materials (up to 1/8 In.): sheet metal, ducts, steel, copper, brass, aluminum, plastic, Plexiglass…
Read more about this product
2 Review
This carbide forstner bit has a 1-1/8" cutting diameter and a 10mm shank compatible with all standard drill and drill press chucks. Drill clean and accurate holes in solid wood, plywood and MDF. Constructed with carbide tips for quality and longevity. The 10mm shank is compatible with all standard drill and drill press chucks. Hardened steel body for…
Read more about this product
2 Review
3/4-Inch Weldon shank with 2 flats at 90-Degree makes cutters mounting reliable, and extend tool life than other mounting system. It fits most brand magnetic drill presses;. Multiple cut edges provide more efficient cut rate with less chatter and suit to making overlapping holes, slotting holes and edge cuts in various metals accurately, quickly & safely…
Read more about this product
2 Review
Quality high speed steel ensures the bits super hard, sharp and cutting effectively with impressive cutting performance in metal, plastic, and wood etc with long tool life. All drill dimensional & tolerances conform to ASME/ANSI B94.11M drill standards or USCTI - United States Cutting Tool Institute (formerly MCTI). Fully ground process ensures…
Read more about this product
2 Review
Milwaukee Thunderbolt Bit 7/64 In Cobalt. Milwaukee Thunderbolt Cobalt coated drill bits are designed for extreme durability and long life. This is manufactured in China.
2 Review
Bolt extractor is built for maximum durability and long life with impact drivers. High-carbon steel helps ensure long bolt extractor life and great durability. Universal lobular design fits most types of fasteners. Reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws…
Read more about this product
2 Review
High Speed Steel - Suitable for below 25 hardness of the work piece, such as carbon steel, sheet iron, insulation boards, PVC boards, planks, and wood thickness below 5MM. Made with drop forged heat treated high speed steel (HSS) with titanium nitride coating for longer life time. Good Design - Triangle shank fits into power tools chuck securely and…
Read more about this product