🪚 Industrial Drill Bits
3 Review
50 SIZES IN 5 PIECES STEP DRILL BITS -- The bits set includes five standard step drill bits that can replace 50 individual drill bits and each step drill bit can drill several bore diameters, compatibility with 1/4, 3/8 and 1/2 in. chuck sizes. You don't have to replace drill bit constantly with the step drill bits. HSS Titanium Coating -- The Titanium…
Read more about this product
3 Review
6-Cutter bit tip is engineered for drilling in reinforced concrete. Centering tip features a more aggressive design for faster hole starting. Central guiding action engineered for more accurate holes. Aggressive head geometry in primary cutter engineered for use in concrete. Engineered for reduced vibration.
3 Review
Suitable for hard and softwood, coated chip board, laminates as well as MDF plates. High Rotation Speed. Precise Cutting Quality. Optimized cutting resulting in an improved running of your drill. Can be resharpened up to 30 times before needing to be replaced.
3 Review
Total Length: 85mm / 3.3"; Shank Diameter: 5.2mm. Product Name: Twist Drill Bit; Package Content: 2pcs x Twist Drill Bit. Material: HSS, Cobalt; Flute Length: 43mm / 1.7". Bit Diameter: 5.2mm; Weight: 22g. Fearure: Straight Shank; Color: Champagne Color.
3 Review
9 Piece boring bar set features C-6 carbide for use in harder materials but also works great in aluminum and other soft metals. Shank Diameter- 3/8". Minimum Boring Range: 5/16" - 7/16". Overall Length: 2" to 3-1/2". Boring Depth Range: 3/4" to 2-1/4".
3 Review
High grade steel 1045 carbon steel for a longer life. Use when a 6-Inch bit is too short and 18-Inch is too long for the hole. Quick change 7/16-Inch hex shank for use in quick change chucks or standard chucks. self feeding screw point for faster hole starts and easier cutting. Machined on a center post for a stronger more rigid bit.
3 Review
Hex shank design allows for quick and convenient bit changes. 1/4" hex shank for direct use in impact drivers. Includes bits for drilling in metal and masonry materials. Also works with 3/8" and 1/2" drills.
3 Review
*Package Content --- 2 x SDS Plus drill bit, 0.7" x 8.3"/ 18 x 210mm (D*L). *Quality Selection --- Made of rock carbide, optimized brazing and hardening process for longer bit life. *Using Design --- Unique sharp drill bit in order to easy positioning when drilling, and break up the masonry powerfully. The elongated four flute helix for faster material…
Read more about this product
3 Review
Made of industrial-grade M2 high speed steel, heat treated for maximum durability. Two flute spiral design provides longer life and better chip removal,3 flatted shank prevents slipping in drill chuck. 7/8 inch and 1-1/8 inch step bit. CNC fully grinding for longer tool life to save drilling cost. Ideal for drilling holes into thin materials such as…
Read more about this product
3 Review
3/32", 7/64" and 1/8" pilot with 3/8" counterbore; 9/64" pilot with 1/2" counterbore. Each countersink tool includes replaceable HSS twist drill for drilling pilot hole. Includes precision milled 3" long driver bit with hardened #2 Square Drive Insert. Engages Centrotec chuck for extremely close axial alignment of bit and output shaft of drill. Reduced…
Read more about this product
3 Review
Forstner Bit Extension Shank. 3/8-inch Barrel Inside Diameter. 5-1/8-inch Overall Length, 3/8-inch Shank. Premium quality design. Quantity - 1 per Pack.
3 Review
Round shank designed for rotary and percussion hammer drilling through block, brick, stone, concrete and marble, Swift Cut (Registered Trademark). Tungsten Carbide reinforced head - precision ground. Induction-hardened body ensures straightness and strength, black-oxide finish. Engineered with wide flutes for fast dust removal. Diameter: 1-inch, Overall…
Read more about this product
3 Review
5-piece countersink set for screw sizes #4, #6, #8, #10, and #12. Drill the correct pilot hole and recess for countersinking a screw all in one step. Adjustable four-cutter counterbore for fast, smooth cuts in all types of wood and plastic. Loosen to adjust the depth for variable length screws. Drills tapered to match the profile of traditional…
Read more about this product
3 Review
Country of Origin:Taiwan. Package length:27.0". Package width:2.75". Package height:0.88".
3 Review
HSS & Titanium Coating - High speed steel makes it last longer than others, titanium coating ensures easily cut through steel sheets, aluminum sheets, copper & plastic & wood board and many other types of sheet metal with ease. Good Design - Hex Shank fits into power tools chuck securely and eliminates slip; two-flute design clears chips faster and…
Read more about this product
3 Review
3/8" x 8" Auger Drill Bit with a 5/16" Shank. Solid center design for rigidity when boring. Coarse screw point provides fast boring in hard and soft woods. Quality Guaranteed.
3 Review
Amana Tool is an industry leader for over 40 years. Devotion to consistently providing the highest quality. Solutions for manufacturers, fabricators, display and cabinet professionals. U.S.A. Corporate headquarters and warehouse, located in new York. Commitment to offer the highest consistent quality and innovative products.
3 Review
This product is easy to use. This product is highly durable. This product is manufactured in China.
3 Review
Molybdenum coated to run cooler and stay sharp longer. High grade 1060 carbon steel stronger than any other auger on the market. Molybdenum coating acts as a dry lubricant to prevent clogging and eject chips faster. The coating acts as a dry lubricant to prevent the cutting edge from annealing. Machined on a true center to minimize run out and reduce…
Read more about this product
3 Review
Precision ground from one piece of high speed steel with no weak welds or crimps. 1.9 to 2.32 inches overall length gets into tight spaces. Standard 1/4 inch hex shank fits most quick change or regular chucks. Brad point tip for pinpoint accuracy when drilling wood.Individually packaged so you only pay for the bits you need most. Does not fit all chucks…
Read more about this product