🔧 Milling Accessories
3 Review
Tapered Ball Nose carbide EndMill / Cone Cutters with 1/4 Inch Shank 2 Flutes, H-Si Coated. Ball Raidus: 1.5mm, Flute Length: 1-1/4Inch, Overall Length: 3Inch, Single Side Angel: 3.02Deg. The Tapered Carbide Carving bits suit For CNC,Engraving Carving 3D machine. For HRC 55 Carving and machining hard wood, solid wood, partical board, plywood, stainless…
Read more about this product
3 Review
Tapered angle Ball Nose End Mill / Cone Cutters. 1/4Inch Shank Diameter, 2 Flutes, H-Si Coated. Ball Raidus: 0.25mm, Flute Length:1-1/4 Inch, Overall Length: 3 Inch, Single Side Angel: 5.2Deg. For CNC,Engraving machine.Suitable: Acrylic, MDF, Hardwood, Carbon steel,alloy steel,inconel,stainless steel,titanium alloy etc. Suitable Material: 55HRC, Long…
Read more about this product
3 Review
Premium Micrograin Carbide. High Surface Quality. Made In USA. Great for Deburring in the machine. Works in all materials.
3 Review
Made in China. Package height :5.588 cm. Package length :5.588 cm. Package width :15.748 cm.
3 Review
4 Flute design for creating finer finishes and creating a higher metal removal rate. Cobalt roughing end mill for working on all types of materials and high temperature alloys especially slotting and profiling. Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless…
Read more about this product
3 Review
Devotion to consistently providing the highest quality. Solutions for manufacturers, fabricators, display and cabinet professionals. U.S.A. Corporate headquarters and warehouse, located in new York. Commitment to offer the highest consistent quality and innovative products. Industrial grade.
3 Review
5 flute design provides exceptional cutting ability in many hard to machine alloys & leaves the material with a fine polished finish High Performance ideal for peripheral finish milling steel, titanium & high temp alloys Made of extra-fine grade carbide for ultra high transverse rupture strength Titanium Aluminum Nitride (TiAlN), combines high thermal…
Read more about this product
3 Review
5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length. The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated. For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc. The Ball Nose End Mill Suit for…
Read more about this product
3 Review
4 flute design for creating finer finishes and a highter metal removal rate General purpose end mill for working all types of materials Made of extra-fine grade carbide for ultra high transverse rupture strength Titanium Aluminum Nitride (TiAlN) combines high thermal stability with excellent hardness for abrasion resistance and a low coefficient of…
Read more about this product
3 Review
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of…
Read more about this product
3 Review
Shank Diameter: 6mm / 0.24"; Cutting Diameter: 5mm / 0.17"; Number of Flutes: 2. Cutting Length: 13mm / 0.51"; Overall Length: 57mm / 2.24". Suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, soft alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc. Material: HSS-AL, sharp and durable, bending…
Read more about this product
3 Review
Standrd: Cutting edge diameter: 2.5mm / 0.098"; Shank diameter: 3.175mm / 1/8"; Cutting edge length: 12mm / 0.47". Material: Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency. Features: High hardness, high wear resistance, high strength. Have sufficient bending strength and wear resistance…
Read more about this product
3 Review
Carbide Indexable End mills, R8 shank, 2'' AP16, Overall Length: 6-1/8". Positive rake 90°, right hand cut. Reduces cutting forces, Maximum rigidity. Used for slotting and peripheral milling. 5 Flutes, carbide inserts APKT1604 installed.
3 Review
☆Material: Tungsten Carbide TiAlN Coated,3 times Durable than Carbide. ☆6pcs 1mm 2mm 3mm 6mm 8mm diameter 4 Flute End Mill Cutter CNC Bits/set,Easier roughing and finishing processing. ☆U-shaped bottomgroove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining…
Read more about this product
3 Review
Made In the USA. 1/2 Shank diameter. 1-1/4 Length of Cut. 3 Overall Length. 4 Flutes.
3 Review
Shank diameter: 3.175mm /0.125 inch. Note: Please confirm the size before paying. Cutting edge diameter: 1.5mm. These Engraving bits have sufficient flexural strength and wear resistance. Milling, hole and plate edge, surface clean, tidy, no burr.
3 Review
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems. Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications. Round shanks allow use with a wide variety of…
Read more about this product
3 Review
3 flute design for smoother/quieter milling operations High performance ideal for Peripheral Milling of aluminum and non-ferrous materials Made of extra-fine grade carbide for ultra high transverse rupture strength Titanium Carbonitride(TiCN), allows for optimal end mill and machine tool performance with it's ability to increase material removal rates 3…
Read more about this product
3 Review
2 Flute design makes these ideal for plung cutting when chip removal is not a problem. High Performance for working on Stainless Steel, Titanium and high temperature alloys. Made of extra-fine grade carbide for ultra high transverse rupture strength. Uncoated Tools feature just the base substrate without any additional treatment or coatings and are…
Read more about this product
3 Review
90° heavy duty deep slotting. Side milling and finish pocketing cutter. Ideal for high speed machining with low power consumption. No of flutes: 1, No of inserts: 4, Insert Type: APKT11T3, Screw: M2.5. Majorly used for step shoulder, slot milling, ramp milling and plunge milling. Not recommended for angle cut.