🔩 Power Transmission Products
1 Review
SMR85ZZ (I.D.=5mm, O.D.=8mm, Thickness=2.5mm). Bearings are shielded on BOTH SIDES to keep lubricant in. Stainless steel races for durability and corrosion resistance. ABEC Tolerance 1 (P0), Z1 Noise Level for most general use. Dynamic load rating of 166.5N and static load rating of 64.8N.
1 Review
Model: 09074 (Bore: 19.05mm / 0.75", Width: 21.539mm / 0.848"). Single cup (outer ring) for connecting to cones (inner ring assemblies, sold separately) to form a complete single tapered roller bearing. Components are separable and interchangeable that easy for maintenance. Features low friction and low noise that provide operational reliability. Offers…
Read more about this product
1 Review
MR128K (I.D.=8mm, O.D.=12mm, Thickness=2.5mm). mr128k bearings are open type for lubricating. Made from Chrome Steel (GCr15), durability and resistance to under heavy loads. ABEC Tolerance 1 (P0), Z2 Noise Level for most general use. Static load rating of 219 newtons and dynamic load rating of 462 newtons.
1 Review
1" Bore. 52mm OD - Curved. Wide Inner Race. Self-Aligning Bearing. Standard Duty.
1 Review
With double keyway only. Made in United States. Package Weight : 0.7 pounds.
1 Review
[SIZE] - 1/4" Diameter Grade G10 Precision Balls. [MATERIAL] - Made of Chrome Steel(AISI 52100), features with polishing smooth surface, great wear-resistant and high hardness. [FEATURES] - Wide range of applications(maintain industrial equipment or use for family DIY projects); Cost-effective(can repair existing products). [APPLICATIONS] - Maintain…
Read more about this product
1 Review
I.D. (Fw)= 1", O.D. (D)= 1-5/16", Width (C)= 1-1/16". ST14 steel drawn cup, GCr15 needle rollers one way clutch. Good heat tolerance, high load carrying capacity and stiffness. Low cross section, enable downsizing and suit for use in restricted mounting spaces. Pre-Lubricated. Good running properties.
1 Review
Thrust washer for use with Koyo Torrington NTA-series thrust needle roller and cage assemblies in applications where adjacent components cannot serve as raceways. Through-hardened chromium steel for durability and resistance to deformity under heavy loads. Flush-ground raceways for higher speeds and greater running accuracy than unground raceways…
Read more about this product
1 Review
Model: 30202(Bore: 15mm, Outer Diamter: 35mm, Total Thickness: 11mm). Single row tapered roller bearings must be used either with a second bearing or as a matched pair. Components are separable and interchangeable that easy for maintenance. Features low friction and low noise that provide operational reliability. Static Load Rating of 13.4kN and Dynamic…
Read more about this product
1 Review
Package includes 10 bearings. Carbon steel deep groove ball bearings. 2 rubber shields. Radial bearings. 8mm inner dimension, 22mm outer dimension, and 7mm width.
1 Review
Single-row bearing for supporting radial loads. Double shielded to keep lubricant in and contaminants out. Chrome steel for durability and resistance to deformity under heavy loads. 34,000 RPM limit with grease lubrication. Dimensions suitable for use in such applications as skateboards, inline skates, and scooters.
1 Review
R12-2RS Bearing: With both rubber sealed, this R12-2RS bearing can effectively save grease,extending the life of machine. Bearing Material: Made of chrome steel manufacturing, can deliver high performance and high load capacity. R12-2RS Bearing Size: 3/4inch x 1-5/8 inch x 7/16 inch. The high accuracy of the bearings enables excellent high-speed…
Read more about this product
1 Review
Two-bolt housing with ball bearing insert for a ready to mount installation. Cast iron housing and steel bearing unit for carrying shafts with radial or radial and thrust loads. Relubricatable solid one-piece housing pillow block for maximum strength and rigidity. Non-expansion-type bearing with setscrew locking collar for secure attachment to guided…
Read more about this product
1 Review
Brand new and high quality U Groove Bearings. Deep groove ball bearings, fashionable, slide flexible, compression wear. U groove size:3.8mm x 2mm. Bearing Material:High Carbon Steel. Suitable for furniture hardware accessories, mobile doors, glass sliding doors, aluminum doors.
1 Review
608 Bearing: 10 Pcs 608ZZ Miniature Deep Groove Steel Sealed Ball Bearings. 608 ZZ Skate Bearings: double shields sealed ball bearings on both sides keeping lubricant in and contaminants out. Deep Groove Ball Bearing Material: bearing steel, durability and resistance to deformity under heavy loads. 608zz bearing Size: Approx. 8x22x7mm Inner Diameter:8mm…
Read more about this product
1 Review
Brand New in box. The product ships with all relevant accessories. Country of Origin: MEXICO. Package Weight: 2.495 kilograms. Package Dimension : 7.62 cms L x 7.874 cms W x 60.96 cms H.
1 Review
[SIZE]: 18mm x8mm (Dx H) rubber mount with M6 x 16mm Studs , Shore hardness (+/-5°):55 durometer; set of 2 pieces. [COMPACT AND STABLE]: Simple geometric structure design, rubber and carbon steel fasteners with shore hardness of 40-60 degrees, and advanced manufacturing process of internal of insert die can provide strong dynamic buffering performance…
Read more about this product
1 Review
Size: 6802ZZ (Inner Dia.=15mm, Outer Dia.=24mm, Thickness=5mm). Shields on BOTH SIDES of the bearing to keep dust out. Suitable for high speed operation. Made from Carbon Steel, durability and resistance to under heavy loads. ABEC Tolerance 1 (P0), Z1 Noise Level for most general use. Pre-Lubricated, Easy to maintain.
1 Review
Package Dimensions: 6.096 H x 46.482 L x 9.906 W (centimetres). Safe and quick installation. Country of Origin : Mexico. Package Weight: 4.2 pounds.
1 Review
High Quality: Made of premium material, the bearing caster has great corrosion resistance, wear resistance, hard hardness, can offer long term service. Specification: 5/8” diameter ball bearing roller, 28lbs load bearing capacity. 360° Rotation: The ball transfer bearing caster can rotate 360 in all direction, easy to use. Wide Application: It is…
Read more about this product