Header banner
Revain logoHome Page

🖥️. Single Board Computers

All results
vilros raspberry official touchscreen keyboard computer components logo
Revainrating 2 out of 5

1 Review

Includes everything you need to Build a Raspberry Pi Powered Computer. Includes: Raspberry Pi 4 Model B With 2GB Ram--Official 7" Touchscreen For Raspberry Pi--Case That Holds the Screen and Pi Board--3000mA 5.1V Power Supply (Powers the Pi board which then Powers the Screen)--Gaming Style Mini Keyboard/Touchpad--32GB Samung Class 10 Micro SD Card…

Read more about this product
geeekpi prototype breakout breadboard raspberry computer components logo
Revainrating 2 out of 5

1 Review

Suitable for Raspberry Pi 4 Model B & Raspberry Pi 3/2 Model B/B+/ Raspberry Pi 1 Model B / Pi 1 Model A+. PCB Dimensions: 57mm x 66mm, Thickness: 1.5mm. To kick off the HAT party, we have this proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes…

Read more about this product
geeekpi 4x prototype breakout diy breadboard pcb shield board kit for raspberry pi 4 3 2 b+ a+ (blue) logo
Revainrating 2 out of 5

1 Review

Suitable for Raspberry Pi 4 Model B & Raspberry Pi 3/2 Model B/B+/ Raspberry Pi 1 Model B / Pi 1 Model A+. PCB Dimensions: 57mm x 66mm, Thickness: 1.5mm. To kick off the HAT party, we have this proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes…

Read more about this product
rexqualis ssd1306 self luminous compatible raspberry logo
Revainrating 2 out of 5

1 Review

Applications: 0.96 inch OLED module for showing graphical & textual information directly on your micro-controller projects; It supports many chips: compatible with Arduino , Raspberry pi, STIM 32, etc;. Resolution: 128 x 64, View angle: > 160°, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W…

Read more about this product
octagonstar l293d motor shield arduino logo
Revainrating 2 out of 5

1 Review

hiletgo nodemcu development esp8266 compatiable logo
Revainrating 2 out of 5

1 Review

Mini NodeMcu based on ESP-8266EX. WIFI Development Board,4M bytes. Support OTA on line. Arduino ompatibility. Using the Arduino IDE for programming. 5V 1A switching power supply (switching power supply)onboard

youyeetoo slamtec rplidar slamtec m1m1 tof laser scanner kit 20 meters scanning radius lidar sensor scanner for bstacle avoidance and navigation of robots logo
Revainrating 2 out of 5

1 Review

SLAMTEC M1M1 can detect up to 20 meters with the 5cm resolution and the re-localization accuracy is less than 0.02m. it is quite easy to use, there is no need for any external dependency, just connect it with your computer via the USB cable, it will work then. Slamtec Mapper adopts SLAMTEC third-generation high-performance SLAM graph optimization engine…

Read more about this product
raspberry electronics programming solderless breadboard logo
Revainrating 2 out of 5

1 Review

【Upgraded Complete Starter Kits 】 -Comes with variety modules and components Starter kits for raspberry pi,which accessories meet all the Learner basic needs.Detailed Tutorials are provided.(No paper tutorial.). 【3 Programing Languages Support】 - C, Python (compatible with 2&3) and Java. 【Compatible Models 】- Compatible with Raspberry Pi 400 / 4B / 3B+…

Read more about this product
acrobotic esp8266 arduino nodemcu raspberry logo
Revainrating 2 out of 5

1 Review

ESP8266 ESP-12F development board ready for Arduino, NodeMCU, AT+Commands (Plug and Play). Built-in CH340 USB to Serial UART adapter and Micro-USB connector (Plug and Play). 11 Digital, 1 Analog GPIO; PWM, ADC, I2C and 1-Wire available. Two diode-protected power inputs (one for a USB cable, another for a battery)

stepper microstepping raspberry pi xygstudy logo
Revainrating 2 out of 5

1 Review

Part Number: Stepper Motor HAT. This Stepper Motor HAT gives your Raspberry Pi the ability to drives two stepper motors at the same time, supports up to 1/32 microstepping. Standard Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B and later versions, Jetson Nano. 6 available microstepping modes…

Read more about this product
acrobotic temperature barometric raspberry altimeter logo
Revainrating 2 out of 5

1 Review

BMP180 Temperature/Barometric Pressure Sensor Shield for the WeMos family of boards for the ESP8266 and ESP32. BMP180 I2C lines connected to pins D1 (SCL) and D2 (SDA), which are the default for I2C on the Arduino IDE. Default I2C address: 0x77. BMP180 measurement range: Temperature –40~85°C ± 2°C; Barometric Pressure 300~1100hPa. Easiest way to add a…

Read more about this product
jetracer ai kit accessories for jetson nano to build ai racing robot car with front camera eye dual mode wireless wifi for deep learning self driving vision line following donkeycar @xygstudy logo
Revainrating 2 out of 5

1 Review

Part Number: JetRacer AI Kit Acce. JetRacer is an autonomous AI racing car powered by NVIDIA Jetson Nano by interactive programming via web browser. It allows high frame rate processing due to torch2trt(PyTorch to TensorRT translator) optimizing, so that faster autonomous line following driving can be easily achieved. JetRacer AI Kit also supports…

Read more about this product
winogneer serial expansion raspberry receive logo
Revainrating 2 out of 5

1 Review

Up to 16 independently with power and ground GPIO (3.3V level), and provide a corresponding relationship table, at a glance. Two independent SPI extended interface with 1 I2C extended interface. One RS232 standard serial port, can be directly connected to the PC etc. 0. 0

realtec rtd1296 suitable entertainment automation logo
Revainrating 2 out of 5

1 Review

Memory: 2GB DDR4 (shared with GPU), Storage Support MicroSD (TF) card, SATA 6Gbps, 8eMMC. OS: Android/Linux,CPU:Realtek RTD1296 quad-core ARM A53,Mali T820 MP3 GPU. HDMI In/Out,USB Ports: 1x USB 3.0 host,2x USB 2.0 OTG,1 type C interface. Onboard Network2x 10/100/1000Mbps Ethernet, PCIE 2.0 interface.PCEe 1.1&SDIO. Power Source: 12V @ 2A via DC power…

Read more about this product
arduino 2wd car robot lafvin modeling kit logo
Revainrating 2 out of 5

1 Review

The perfect starter kit for programming. With arduino you will learn basic programming skills. Gradually, as you assemble the car, you will learn how to work with a large number of modules, and you will also have experience with a two-wheeled car. -SR041 x Holder for ultrasonic sensor 1 x Servo SG901 x Servo holder 2 x Wheel and 3-6V motor 1 x Battery…

Read more about this product
uctronics complete enclosure raspberry removable logo
Revainrating 1 out of 5

1 Review

Complete Case - Designed to house Raspberry Pi 4 B boards, 2.5” SSDs and ethernet switch in a cluster configuration in both a small and convenient form factor, please note it doesn't support Raspberry Pi 3B/B+ and the older models. Note: It comes disassembled and needs to be installed briefly before use. Front Removable - Each baseplate is independent…

Read more about this product
usi mt7697h development alexa connect logo
Revainrating 1 out of 5

1 Review

USI development board fitted with a Mediatek WM-BN-MT-52-based Alexa Connect Kit module. Arduino Zero for prototyping flexibility. Micro-USB cable. USB Type-C to USB 3.1 Adapter Cable. LED for dev kit quickstart and prototyping

tangyy digital temperature humidity raspberry logo
Revainrating 1 out of 5

1 Review

DHT22:Working voltage 3.3-5V. With mounting screw hole, mounting can be fixed. Easy connect: DHT22 connection is simple and convenient to operate. It can connect to UNO or Raspberry Pi Or some other microcontroller to read the value and send the info to a display. Widely use: Hvac system, humidity regulator, dehumidifier, test and inspection equipment…

Read more about this product
makeblock programming education integrates electronic logo
Revainrating 1 out of 5

1 Review

AI & IoT Application: Pairing with block-based programming software mBlock, Halocode offers all sorts of opportunities to experience AI & IoT application with just a few clicks, like controlling home appliances in distance, AI speech recognition etc. Support 60+ expansion parts: HaloCode can be expanded with more than 60 kinds of expansion accessories…

Read more about this product
techson acrylic raspberry stackable cluster logo
Revainrating 1 out of 5

1 Review

Complete stackable clear acrylic case kit for up to 4 Layers. Compatible current Raspberry Pi's including Pi 3 B, Pi 3 B, Pi 2 B, Pi B. With the stackable design, it provides an easy solution for Raspberry Pi clusters. 4 Layers Acrylic Case: The highest can be stacked up to the 4 layers. According to your needs, the number of stacked has your decision.1…

Read more about this product
Didn't find what you were looking for?
If you could not find on our platform the desired company or product for which you wanted to write a review, you can create a new page of the company or product and write the first review on it.